Jump to content
SAU Community

Recommended Posts

an omelette... with eggs?! :rolleyes:

and the EF3 plans? naice.

ef3 is already installed.

benny from benchmark will be remote tuning it soonish.

had to fix the wideband not logging via the ecu (fixed last night, was referencing the wrong data point), and i blew out 1/4 of the head/manifold gasket (replaced that monday morning before work) and the previous owner chopped 10cm out of the lower radiator hose so i had to replace that so the intake pipe would fit on nicely (fixed that tuesday morning before work)

the 2.3 kit parts are all sitting there waiting, just need the cashola to have it built, but im in no rush, with the ef3 instead of the gt30 its so much nicer to drive, even on the stock 2L.

orange juice for extra flavour.

Yes four stud (only need 8 for front) and yes i prefer steel over the aluminium Rays ones that have basically been stripped.

I need 1.25 thread because Nissan

mine were used on the skyline (LMGT2 wheels have retardedly small holes for the nuts)

i assume the evo is the same as the magna which is 1.5 thread iirc, which means they are useless to me. if you want them $20 posted

yeah have read good things about benny on evooz.

i would be leaning towards and ef2 or ef2.5 i think, but if you've got a 2.3 to go on later... sweet as. exciting times.

the 3 isnt what i would call laggy, it makes some positive pressure at 2k (0.1-0.2 bar) and at 3k makes ~1bar.

if i didnt have the 2.3 kit, or a skyline that was making 390kw previously, my pick for a low cost setup would be an evo 9 turbo on E85, or get the GTPumps slightly tickled version with titanium rear wheel if you have a larger budget (same as what lance has (black evo 5 making high 290kw on e85))

the 3 isnt what i would call laggy, it makes some positive pressure at 2k (0.1-0.2 bar) and at 3k makes ~1bar.

if i didnt have the 2.3 kit, or a skyline that was making 390kw previously, my pick for a low cost setup would be an evo 9 turbo on E85, or get the GTPumps slightly tickled version with titanium rear wheel if you have a larger budget (same as what lance has (black evo 5 making high 290kw on e85))

I bet after it comes on, it's all smiles :P

Yeah that's what I'm leaning towards tbh. Or perhaps a bbk lite (or maybe even full) / fp green if i'm searching for a bit more... but E9/RS turbo looks like srs contender for the route I take.

i looked at the BBK and FP turbos, but 2300/2500 for a high flow stock turbo, no thanks.

at the moment its only running gate pressure (18psi) so it goes but its got nothing on the skyline in terms of how rapidly it gains speed.

Nothing definate yet, Let me just check if the lady is free for din dins

Hi bubs,

How's your day going?

Would you like to go out for dinner tonight?

I'd love to go try out that Japanese place, Chiba, that my friend works at, and he's working tonight

http://www.chibajapaneserestaurant.com.au/

xx,

Simon

Reply =

Hi Simon,

There is so much going on in my head all the time and so much I don’t and can’t talk to you about. I have been trying to talk to you all week, since you returned from DECA, but I was so overjoyed to see you and spend time with you that I kept procrastinating. We have such a wonderful time together. You are the most amazing person I have ever met…

But there is something wrong with me. I can’t be with you. My heart has been severed in two and part of me is lost. I just keep telling myself that with more time passing and us becoming close, things would get better inside of me, but they haven’t. And it’s killing me. I can’t keep in avertedly hurting you, and me by continuing this. I have so much guilt about it. And so much pain.

Please don’t hate me forever…I wish more than anything, that you could be happy…but I am not the person to do it.

I love you and I’m sorry.

i looked at the BBK and FP turbos, but 2300/2500 for a high flow stock turbo, no thanks.

at the moment its only running gate pressure (18psi) so it goes but its got nothing on the skyline in terms of how rapidly it gains speed.

Dat stock spool? :P

Haha... what's the plans with Benny's tune? ~25psi?? Evo's boost monsters.

Reply = Her breaking up with me for some unknown reason... da fuq?

If srs... wtfux :(

Simon brah

That shit is whack and I knew where if was heading from the first line. I wouldn't have even replied to it; breaking up over email...

That last line is a kicker and will provide me with sufficient lulz and/or jimmy rustling for the day.

Consider it a bullet dodged early on, my man.

How long we're you with her for?

EDIT: almost forgot to ask, was she any good in bed? I would expect at least an R = 0.8 correlation for dat dere cray cray.

Dat stock spool? :P

Haha... what's the plans with Benny's tune? ~25psi?? Evo's boost monsters.

If srs... wtfux :(

Going to leave it at gate pressure for now.

Will go crazy on it once built, don't want any chance of block windows, ain't nobody got time for dat.

I don't intend on using e85 on it at this stage, I only want ~300kw from it.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...