Jump to content
SAU Community

Recommended Posts

If you ran that trap speed with no cage in a jap car there is NO chance they would let you run again

nah it's just heathcote don't care, calder will tell you to slow down then boot you off at anything over like 130 or 140 i think

Hey Martin; you do a lot of traveling...

Thinking of buying a new laptop to use when onsite & on transit (planes, airport lounges etc)

Asus Taichi 31 - tablet / laptop hybrid ; easy to play with on transit

http://www.asus.com/Notebooks_Ultrabooks/TAICHI_31/

Alienware 14 - most powerful 14" laptop ; more usability when onsite or at home

http://www.dell.com/au/p/alienware-14/pd?oc=w510772au&model_id=alienware-14

Laptop will be my only system at home, transit & on-site.

Better to get a laptop with more power to use at home/onsite or a laptop which is easier to use during transit etc?

Any other suggestions would be great! Although dont want to spend more than $2k

Thanks :)

yes they put you in groups.

they will ask for any experience when you say none they will look at the car and pick a group.

Auto Manual Stag will be in one of the slowest ones.

Just do the next SAU VIC track day Huy

At least you'll be driving with alot of familiar faces

And less chance of a random spinning out in an emo.

hmmm.... you guys think I'll be fine with stock breaks? 1 hard lap then 1 cool down lap in each run?

Think I might stick to deca this year before a tune and brake upgrade.

Don't buy a netbook. You'll just want to head->desk repeatedly.

Although that said, I'm a fan of the PC at home, and if going down route of home pc+laptop; laptops are fairly affordable these days and should be able to get a decent i5 etc. Haswell is out now too, so.

I'll probably buy an ultrabook of some sort next sem.

Always gotta weigh up performance vs cost vs portability... but $2K budget seems plenty to get best of all three aspects.

I've heard some good things about LBO horize ones which you can customize too. But name brands are around for a reason too :P

/Nothelpful

If you want to use on the move get a 13 inch ultra book

Personally I'm looking to move to a Samsung ultra book myself

If you need more power/ screen than an ultra book at home get a tablet and a home system separate

And no idea why ppl think I travel much!!!!!

They do Alienware stuff now anyway.

this. reason alone not to get Alienware.

Dell is probs best for cheap laptops because of "customer service" and no lack of spares. in the end, it's a laptop, it'll be a POS in 2 years no matter how good care you take of it (unless it sits dormant and doesn't have new things installed)

speaking of travel, 4:45 wake-up call for 7:45 flight yay. only going to Sydney though, so not as exciting. f**king swear flights to Fuji would have been cheaper *grumble*

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...