Jump to content
SAU Community

Recommended Posts

Yeah been thinking about that too!

It seems to me the easier option straight up if you already have the supporting mods. Then if it's still not what you want, upgrade turbo and you're already on E85 :)

It seems to me the easier option straight up if you already have the supporting mods. Then if it's still not what you want, upgrade turbo and you're already on E85 :)

How much did it cost to convert to E85?

And do you know how much it costs to go a full flex-fuel setup? I assume you need a new ECU as well? Dont think Nistune will do it

alcohol is for drinking. oil is for driving.

f**k the enviroment yo.

^^ Pommy prick pretending to be a mullet eating bogan. Just because your dinosaur V8 goes backwards in power on ethanol. :P

With some decent comp and drilling the jets on your carby I could possibly get some more powers out of your clunker Paul...

^^ Pommy prick pretending to be a mullet eating bogan. Just because your dinosaur V8 goes backwards in power on ethanol. :P

With some decent comp and drilling the jets on your carby I could possibly get some more powers out of your clunker Paul...

wadda ya mean pretending?

tank is a tank. dont need more power. just needs a s bigger gun.....

How much did it cost to convert to E85?

And do you know how much it costs to go a full flex-fuel setup? I assume you need a new ECU as well? Dont think Nistune will do it

If you have the overhead in your fuel system, it costs nothing... Forget the flex fuel for now, just get on it...

If you have the overhead in your fuel system, it costs nothing... Forget the flex fuel for now, just get on it...

Probably not.

My fuel pump i got serviced about 3 years ago via Sabbadin Automotive. All it said on the invoice was a Hi Flow Walbro fuel pump. Don't even know what model it is

How much did it cost to convert to E85?

And do you know how much it costs to go a full flex-fuel setup? I assume you need a new ECU as well? Dont think Nistune will do it

need to go a haltec/link/vipec etc if you want flex fuel. changing to that is quite a few $$$ as its sensor + two tunes + ecu, you would also want the ecu controling boost as you can run a heap more on E85 than 98.

How much did it cost to convert to E85?

And do you know how much it costs to go a full flex-fuel setup? I assume you need a new ECU as well? Dont think Nistune will do it

$500 for the tune

My engine already had the supporting mods; I had planned for ethanol eventually a long time ago. Supporting mods = basically just a big enough fuel system. 555s and a 040 will do you safely up to 300rwkw.

Also, fk flex fuel. Just get tuned on United which is consistently E85 afaik. There's one in Clayton and one in Scoresby you can fill up at. Car runs beautifully; I don't even have a wide band.

$500 for the tune

My engine already had the supporting mods; I had planned for ethanol eventually a long time ago. Supporting mods = basically just a big enough fuel system. 555s and a 040 will do you safely up to 300rwkw.

Also, fk flex fuel. Just get tuned on United which is consistently E85 afaik. There's one in Clayton and one in Scoresby you can fill up at. Car runs beautifully; I don't even have a wide band.

With Flex fuel more so thinking on long trips and the ability to use any fuel you want

So say your driving on a long trip you got 1/4 fuel of e85 left. You fill up the rest with 98octane since there is no e85.

Load up the map for 98 octane

Is it still ok to drive with a mix of 98 and e85 or?

if you want NA power on e85 you need to go 12-14:1 compression, but then you can never go back to 98.

itd be interesting to see if my tuned for 98 ls1 would run on a 10% ethanol fuel... not that id try it... but itd be good to every now and again not have to spend so much on 98.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...