Jump to content
SAU Community

Recommended Posts

So plugged ps3 in for first time since GT5 came out.

have 3 games for it, GTA4 GT5 prologue and GT5

load up GT5 goes to do update, not enough room on drive.

None of these are DL all on disc, so seems I can only keep 1-2 games data

no wonder I gave on on gaming.

lucky ahve a spare 1Tb 2.5 drive in house, upgrade time b4 GT6 comes out.

So plugged ps3 in for first time since GT5 came out.

have 3 games for it, GTA4 GT5 prologue and GT5

load up GT5 goes to do update, not enough room on drive.

None of these are DL all on disc, so seems I can only keep 1-2 games data

no wonder I gave on on gaming.

lucky ahve a spare 1Tb 2.5 drive in house, upgrade time b4 GT6 comes out.

mate i finally got gta5 for xbox...loads up after i wipe the hdd of almost everything...

freezes every half hour or so and wont save....

turns out a common problem on older xboxs so now i need new xbox to play it...

I feel your pain...

the PS3 I ahve was a day 1 release for PS3 mate had one on pre oder then his work gave him another one, (worked for a gaming comapny)

SO he gave this one to me years back but I barely used it. last save game I can find is 2009

SO I today I finally unplugged my original xbox and plugged this in

got a week off over christmas so will give GT6 a try for a few days.

Center muffler @ 6cm, Just a Minor with no Fines or RWC required

Actually came away pretty happy, considering they did inspect the engine bay :rolleyes:

Was the Knox Yellow HWP car, not our special friend though...

Center muffler @ 6cm, Just a Minor with no Fines or RWC required

Actually came away pretty happy, considering they did inspect the engine bay :rolleyes:

Was the Knox Yellow HWP car, not our special friend though...

isn't yours top mount?

isn't yours top mount?

Na, highflowed R34 op6 housing, still on the factory manifold, everything looks stock just no heat shield over the turbo anymore because of the different actuator.

Center muffler @ 6cm, Just a Minor with no Fines or RWC required

Actually came away pretty happy, considering they did inspect the engine bay :rolleyes:

Was the Knox Yellow HWP car, not our special friend though...

they're getting soft.

Can't even see your intake with the airbok over the top, it's not illegal as far as I know, but anything out of the ordinary is going to make them look further.... It's sprayed a nice satin black anyhow and is in shadow

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...