Jump to content
SAU Community

Recommended Posts

#@blah_blah #@kaitoukid Do either of you have S1 reo for cheapish, and can drop to me in Ringwood or Dave's in Franga tomorrow? I'd come pick it up, but my car is at Dave's.

Neg, mine is on car haha. However...

I have a r34 series 1 front reo if you are going to get another one

------------------------------------

Better food than USA as well

Kinda scary seeing a beer just wander out of the trees tho

stock-footage-walking-beer-300x169.jpg

dem wandering beers doe.

Dave said I don't need one, he's managed to hammer it out. Will still probably acquire one eventually just in case. Also did you quote me saying things I didn't, or is the app being retarded?

Dat structural integrity...

They are only made to take one solid hit and if you can hammer it out again it's prolly in a weak as fk state; and weaker again now that someone has taken a hammer to it. So if you care about the crash zone and legality replace it...otherwise, carry on.

Yeah If you want to drink cocktails on a beach then yeah, Fiji. We went to cancun, in Mexico and it's got an amazing beach if you want to do that

as it is I probably be forced to go to NZ sometime as missus has family there and used to holiday there alot....but it will be against my will :P

anyone recommend a painter/powdercoater for wheels?

not going back to A1 powdercoating in moorabbin.

I was advised a while abck by a powder coater not to powder coat wheels if its a race car....they dont like heat...

which is odd considering everybody thinks powdercoating is the bomb....

Anyway another option...come around some time...bring beer, you help me sand em back Ill spray em for you...save a few bucks that way,, ;)

I was advised a while abck by a powder coater not to powder coat wheels if its a race car....they dont like heat...

which is odd considering everybody thinks powdercoating is the bomb....

Anyway another option...come around some time...bring beer, you help me sand em back Ill spray em for you...save a few bucks that way,, ;)

I keep reading that and it sounds pretty dumb to me. Something along the lines of 800 degree brake dust flying around plus hot tyres making wheels get hot too... Though they are spinning and cooling down, and the heat usually even (as oppose to section by section sandblasting)

I am keen, and am interested, but im not even sure if the bronze can even be sanded off since its not smooth like painted wheels, its quite rough almost like golf ball dimples.

Toby, are you still the treasurer?

If your requesting a refund, i've spent it

Well missus wants to go tas or new zealand in July... anyone here with experience, yay or nay?

New Zealand, Queenstown. Could do a drive down from Christchurch to Queenstown with a stop over at Lake Tekapo. Amazing scenery.

In saying that, airasia flights arent that much more exy. And money spend extra on flights would be saved via accomodation, food and spending costs anyway.

Everything in asia cheap cheap

#@blah_blah #@kaitoukid Do either of you have S1 reo for cheapish, and can drop to me in Ringwood or Dave's in Franga tomorrow? I'd come pick it up, but my car is at Dave's.

I do, but no time to drop it off

meh its fine man....f**k most peopl cut them out and put intercoolers in anyway....just shuddup birds...stop making him worry .its only NA not like it will go fast enough to do any real damage anyway :rofl:

I cut out half my reo with a grinder to fit cooler; cop remarked to me that it was good I hadn't cut any holes in the chassis to for my return flow lol

Just sayin he shouldn't worry about the bump that was already there, if he's not worried about your "customisation"!

yeh i flew into christchurch and drove down, nothing left there after the earthquakes which was pretty sad this was almost 2 years back i think so might of changed.

Things seemed normal pretty much, i was there last year in about October.

Did you eat at Fergburger in Queenstown? I had that for breakfast lunch and dinner. Best burger I've eaten

my sisters bf just got a job as manager for the project of town planning for rebuilding christchurch.

theyve start rebuilding some of it... as most were insurance claimed/government, but if the block of land has a height difference of 30mm or more at the ends then its has to be demolished and rebuilt :unsure:

a lot of the older buildings theyre keeping the front and rebuilding everything behind it.

but if the block of land has a height difference of 30mm or more at the ends then its has to be demolished and rebuilt :unsure:

from what it used to be, or just across the block?

My block has 20m difference front to back :D

Things seemed normal pretty much, i was there last year in about October.

Did you eat at Fergburger in Queenstown? I had that for breakfast lunch and dinner. Best burger I've eaten

Yeh think I had it once over there, we were only in Queenstown 2 or 3 nights I think from memory, should of had more time there.

Did the jet boat thing ini the canyons which was awesome too

Well, looks like it's 6:30... guesss I'm not going GC meet. The gym ( :yes:) and hw ( :no:) beckons instead.

Also on topic, lived in NZ for like 7 years, but wasn't old enough to do anything cool or suggest any cool locales :/. Would definitely rather go there than TAS surely, though?

Or better yet, just go Japan dude. Your wallet won't thank you though. But your heart will.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...