Jump to content
SAU Community

Recommended Posts

What about these?

http://www.rotawheels.com.au/wheels/rota-slipstream

Or are you looking at something cheaper and second hand?

They look nice, but she's after something cheaper and second hand though :(

Thanks anyway bud :)

  • Like 1

Plenty of good wheels available for 4x100. Theyre just only a few hundred bucks cheaper than any other decent wheels. That, and importers dont bring in many because of low demand, so people gotta fork out big bucks to get overnight from japan

  • Like 1

No idea... Tulip St, Cheltenham.

They're going to the tip first thing on Friday morning in a skip, so you'd need to pick them up before then.

5 full sized pine pallets + 1 Beefy CHEP quality pallet + 1 x 44 gallon drum pallet (like birds posted on the back of the truck)

Time's ticking... Skip has been booked for Friday, so they'd need to be taken today or tomorrow. Otherwise, there's another factory here with another 4-5 just sitting out of the front of it most nights...

Plenty of good wheels available for 4x100. Theyre just only a few hundred bucks cheaper than any other decent wheels. That, and importers dont bring in many because of low demand, so people gotta fork out big bucks to get overnight from japan

Overnight from Japan hey........... any chance of getting two of the big ones? Cos I'll need them by tonight. Even if it blows me to pieces.

Oh damn, I wrote an awesome response of things you could do to pass the time... Then I got a phone call and accidentally closed the browser...

It involved a permanent marker, the womens bathroom stalls and pictures of birds' kneecaps...

Instead, I'll leave you with this:

hope the interview and assessment centre went well bro! good luck with the results.

--------------------

didn't realise 'mega' was so pro these days; automatically queuing the files and downloading one after the other... 2ez

though, for most things, torrents still ez

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • would a r34 gtr hood line up with gt/gtt stock fenders? after latch, front bumper and hinges are swapped for gtr ones? or would the fenders be too low or high in relation to the hood surface? ( I believe seeing somewhere that gtr front fenders use some type of riser for the sides, but do not know how that relates to stock gt/gtt fenders.)    
    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
×
×
  • Create New...