Jump to content
SAU Community

Recommended Posts

Your qualification/experience gets you through the resume stage. Your character/personality gets you through the interview stage.

Don't mix up arrogance/"I've got this job easy" with confidence/charm

Yup + 1

I'm also doing interviews at my firm at the moment. If its for a grad position, it would just be how the present themselves & personality. If they seem they will be a good worker

  • Like 1

So, whos the go-to guy for re-assembling an engine with a minimum amount of fuss, quick turnaround and/or a minimum amount of utter bullshit?

Is there even anyone anymore?

http://www.head-spec.com.au/

if motor is already out, turn around is good.

also Moh had good experience with http://engineaction.com/

It's currently still all in the car, and I'm not on speaking terms with it right now.

The head did get ported and polished, then it exploded, then "fixed" and now I suspect it exploded again simply due to the fact that my entire radiators contents appears to have exited through the exhaust.

So that's nice.

Last time (can't believe I'm typing this really) the bottom end turned out to be completely straight. Really hoping it'd be a case of "put a standard head on" and move the cams from the dead one to the new standard one.

However things typically rarely go as planned and/or end up being best case scenario so I'm sure it will cost $100,000 and take approximately seventeen years to get running again.

  • Like 1

http://www.head-spec.com.au/

if motor is already out, turn around is good.

also Moh had good experience with http://engineaction.com/

It's currently still all in the car, and I'm not on speaking terms with it right now.

The head did get ported and polished, then it exploded, then "fixed" and now I suspect it exploded again simply due to the fact that my entire radiators contents appears to have exited through the exhaust.

So that's nice.

Last time (can't believe I'm typing this really) the bottom end turned out to be completely straight. Really hoping it'd be a case of "put a standard head on" and move the cams from the dead one to the new standard one.

However things typically rarely go as planned and/or end up being best case scenario so I'm sure it will cost $100,000 and take approximately seventeen years to get running again.

+ 1

If you need assistance send me a PM and i'll see if a cash job can be done

Originally, this happened:

Piston%202%20Water%20Jacket%203.jpg

This was apparently fixed.

I suspect it's become un-fixed.

It's entirely possible it's not that, and an entirely different cylinder, or gasket, etc. All I can go on is that it behaved itself perfectly on the dyno, so no one really suspected a thing.

Can't really know what damage has been done till it's all pulled apart, the bottom end may not have survived the second time.

That said, the second death was certainly less explosive than the first, which was a good ol fashioned hard stall at 7000 RPM at undisclosed speed.

me and hard stall is this

crossed-fingers-sign-of-the-cross-resemb

but i feel for ya. but there comes a time in any nissan owners life when they have to decide how they want to build a motor... go all out and spend big $$ to get back what you once had, or to go mild where its less risky but also boring (and it will probably still go bang anyway)

I tried that, but it exploded before it left the dyno (before I took receipt of the engine that was put in to do just that)

So I got it forged and stroked to 2.8-9L via Mr Brian Crower.

It did not hard stall the 2nd time. It'll actually start and run on what seems to be 5 cylinders, but yeah obviously I'm not wanting to press my luck by continuing to do that.

last time at winton you took advice to just pull out a bit of timing from your engine, you went back out and barely made it back to the pits...
motor went esploded, taking the bottom end with it.

Can't wait for the weekend, going to pull apart this evo and start making lists of things I want to repair / replace / remove / de-rust.

I get the feeling like it's going to be a decent list :|

Yay new projects!

Saturday morning getting an eye test done at the optometrist, with eye drops... going to have pinger eyes for a few hours so I hope its not too sunny and I'll still be able to drive home without dying :P

dilated-eye.jpg

Stare into my eyes... yes, yes... let the soul flow through you.

lol @ pinger eyes. get pulled into booze bus... theres a few hours of your work time gone.

at winton motor was going to esplode anyway from the sounds of it. should have just called it a day or not even gone lol

lol @ pinger eyes. get pulled into booze bus... theres a few hours of your work time gone.

If I hit a booze bus in 1.5km of Vermont South back streets at Midday on a Saturday, I'd be very surprised.

That said, I've seen one a few times on Terrara road next to the footy oval on a Sunday Morning, in a very visible location that you can avoid if you were still a bit over from the previous night... So a pretty pointless spot if they were trying to get the tards off the road.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...