Jump to content
SAU Community

Recommended Posts

so ISP is internode. happily had 10Mbps download speeds when in clayton. hit 1.1meg a second with steam

have moved to rowville, my plan was not available so had to switch to a different one. have had nothing faster than 430kbps download. router says 4.3Mbps constant. doesnt change with peak load.

before contacting ISP support i plugged router to port in a different room (only 2 in the house) and speed jumped to 7.1Mbps and downloading 720kbps with steam.

house has an old foxtel connection from the street which isnt in use and no home phone. is there anything i can do to get faster? why would the other port be so much slower?

Can be crappy wiring in the house... ring topology on the internal wiring etc... Should always plug in ADSL2+ Modems to the First point in the house, and make sure that the other points are wired in a manner which works well with ADSL (aka. Not how a lot of Phone Wiring was done by people 20 years ago)

Distance from exchange, estimated cable length and estimated speed when doing an address lookup on www.adsl2exchanges.com.au ?

not sure if i should buy a brand new house on a matchbox sized block, or a crappy house on a big block in thomo, and work on that.




pros- lions and eagles on front fence
-thomo
-close to skids

  • Like 2

under 1500m as the crow flies. dunno about cable...

Should be getting decent speeds at that sort of distance, the copper cabling in Wantirna isn't toooo broken down compared to other areas.

Big block

Land appreciates, houses depreciate

theres a nice big 700ish sqm block on the shit side of high st, but that sides slowly getting better.

Jetski

obviously

need a VF GTS Maloo first

I will be mad jelly of lion statues

you can come help me put them up brah.

also found a decent block in mernda, a little bit past epping.

about 630sqm. alex where you at?

Should be getting decent speeds at that sort of distance, the copper cabling in Wantirna isn't toooo broken down compared to other areas.

Meanwhile Telstra still bullshitting me about getting me swapped over to an ADSL2 port in the Boronia exchange that I know they don't have.

Actually told me on the phone that I might have to wait for another customer in Boronia to die / disconnect from their ADSL2 service, in order to free up a port for me. I said what is this, the MCC? Still can't give me an eta for when a technician will get out there and solve it.

My prediction: after weeks and weeks they will eventually get a technician out there to report back (and not tell me, I'm sure I'll have to call) that they don't actually have ADSL2 ports, only Spintel and some other mob do, and bad luck for me...aka something I was able to establish from a quick google.

Meanwhile Telstra still bullshitting me about getting me swapped over to an ADSL2 port in the Boronia exchange that I know they don't have.

Actually told me on the phone that I might have to wait for another customer in Boronia to die / disconnect from their ADSL2 service, in order to free up a port for me. I said what is this, the MCC? Still can't give me an eta for when a technician will get out there and solve it.

My prediction: after weeks and weeks they will eventually get a technician out there to report back (and not tell me, I'm sure I'll have to call) that they don't actually have ADSL2 ports, only Spintel and some other mob do, and bad luck for me...aka something I was able to establish from a quick google.

Get my brother to go in the exchange and plug you in brah. lol

Get my brother to go in the exchange and plug you in brah. lol

I would love nothing more than for your brother to put my plug in his port

Is he available tonight?

Should be getting decent speeds at that sort of distance, the copper cabling in Wantirna isn't toooo broken down compared to other areas.

yeah but if there was a 3-4gbps loss just in the plug choice... it could be f**king anything just on the property.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...