Jump to content
SAU Community

Recommended Posts

Varex converts know

Scotty how hard would it be to fashion up something like that, e.g. valve on the side of a front pipe that opens up or will that make it flow horribly?

The hard part is to find a valve that seals properly.

Or just bolt a plate over a flange, and remove it when you want to annoy your neighbours.

Yeah an exhaust leak under there, even slight would sound like shit.

Plate not a bad idea for track days etc. Waiting for exhaust to cool down before you can remove it / put it back on, not so cool.

Yeah an exhaust leak under there, even slight would sound like shit.

Plate not a bad idea for track days etc. Waiting for exhaust to cool down before you can remove it / put it back on, not so cool.

nah too many track days have noise limits now, nearly need to be quieter than street!

3.5" exhaust with a decent muffler, no cannons unless i have absolutely NO choice.

what do you more exprienced homies recomend? how can i make this sound like its going to bust into your room and eat your soul?

like AAHH32

Magnaflow straight through muffler. Very quiet for straight through. A cat would bring mine close to legal limit (sort of)

they all the same design, just different shapes/diameters.

speaking of which... need help VWL. muffler tips... got a big ass void to fill and not sure which direction to go. want classy but needs to fill 25-28cm wide gap.

DSC02341.jpg

10815169_10203216252783509_945084838_o_z

only example i know of, did twin staggered pipes. looked pretty hectic drifto.

7130710779_1dfaf1fedd_o.jpg

dual square?

ETCDT-24022DL.jpg

?

1.jpeg

62_1688.jpg

sub2.jpg

Reckon that dual square looks classy, if not then the second dual even round.
Third one withthe angle tip seems too dori dori.

That's my 2c but then again, who am I to speak. I've got a cannon... :unsure:

Sooo tempting to buy this and give scotty a call for help :D

http://www.intunemotorsport.com.au/FG-5.0-lt-GT-and-GS-sedan-mild-steel-3-inch-cat-back-system.html

Dam you houses/apartments why you got to bust my grill.

Anyone know what rims these are in the video?

Edited by UNR33L

Dafuq

Ridiculously fast 4G at Melb Airport, I must be right next to a phone tower

Test Date: 28 Nov 2014 11:32 pm

Download: 68.86 Mbps

Upload: 8.69 Mbps

Ping: 21 ms

Connection Type: Cellular

Server: Melbourne

Could fkin game very well off that; that's better than my cable extreme that I used to have :/

Where my fkin Xbox

  • Like 1
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...