Jump to content
SAU Community

Recommended Posts

Hmmmm maybe I should get something similar for oil cooler setup....

They are ok, if you don't mind waiting 45 minutes for your oil to drain. I removed mine, you can have it if I can find it still.

Sweet! But is there a spool difference between 52 and 56? (Like that's even a legitiment concern on a V8 LOL)

Only 6psi?! I was hoping to run about 15psi on E85 LOL

two TD06 turbo's made 500kw on e85 in Cat's car, at only 6-8 psi I think (gate pressure.) These are larger.

two TD06 turbo's made 500kw on e85 in Cat's car, at only 6-8 psi I think (gate pressure.) These are larger.

Awwww YEEAAAHHHHH!!! I'm confident now my goal is relaistic, but even more confident my transmission will blow up. Meh

#thuglife

  • Like 1

They are ok, if you don't mind waiting 45 minutes for your oil to drain. I removed mine, you can have it if I can find it still.

I'll take it for Leesh's car if it's the same thread

Sweet! But is there a spool difference between 52 and 56? (Like that's even a legitiment concern on a V8 LOL)

Only 6psi?! I was hoping to run about 15psi on E85 LOL

Don't need much boost dat dere v8s

Sif sell the blower! although I do understand that you want that 'lol here comes the power' moment back. instead of having power everywhere which gets 'boring?' sometimes.

Edited by UNR33L

Should've advertised the blower here... I probably would've bought it

I kinda did in my build thread LOL I mentioned it cos I was still thinking about it at that stage and then after thought "f**k it, I'm going turbs now"

but yes... pls run 15psi on e85

PLS

!

Don't push me, I'll do it!

Don't need much boost dat dere v8s

Sif sell the blower! although I do understand that you want that 'lol here comes the power' moment back. instead of having power everywhere which gets 'boring?' sometimes.

Yep, that's exactly it! Don't get me wrong, I enjoyed the instant N/A like torque curve of the blower but nowehere near as much as I enjoyed the winding up before the massive spike in torque that a turbo delivers.

And becaue of that, I got bored of the charger and thought it was too slow lol

HG > Garrett

He uses Garrett cores in his BBs anyway, so it's really no contest if he's finding a way to improve on their designs with his own housings

Excellent turbos and I would buy 8 of them if I had 5k to spare

Why don't you supercharger guys just use 1/8th throttle and roll it on progressively faster if you miss the turbocharger feel

Not the same feeling knowing dat power at your feet :(

I used to laugh taking off in first on my GTR without launching you put your foot 100% down, get NOTHING until like 30km/h lol

Why don't you supercharger guys just use 1/8th throttle and roll it on progressively faster if you miss the turbocharger feel

Cos it would still only feel like a small frame turbo at full boost i.e no kick in the dick we all love from a decent sized snail

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • HELP   Hey all, Is there an accelerator cable from another Nissan that can be used on the R33 GTST RB25DET with a Greddy forward facing plenum?  Thanks in advance  Rob 
    • Or do we think it was installed to give 1 bar of boost max, all day, everyday?
    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
×
×
  • Create New...