Jump to content
SAU Community

Recommended Posts

Then I realised I can do these things :P

crown wheel bolts used by eleventy models so that's no good. HOWEVER half shafts are only shared with R34 RB25DET MT so there's your best bet for a bolt in diff centre.

seems like a lot of moolah for just a centre... when i would consider even a viscous diff to be an upgrade.

maybe when i need to get rid of a lot money quickly... and then ill also grab these to fill the wheels

http://www.tunerwarehouse.com.au/index.php/products/product/view/125/1405

odie's D2's looked good today. i'd want low dust brake pads though, EBC seem to do some for D2's but the EBC daily driver pads ive got now make a bit of dust

Lol, grab a 34 Viscous, shove a 38424-40F67 shim in there, call it good :P. R34 also came in torsen LSD too. I think Alvin has one kicking about?

whats the washer do? after seeing Charles' torsen diff in action i dont really want one :P

sub 1:30 is solid time, especially for sub 200kw cars (except for 86's on semi slicks)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Finally got shipping number for the intake and throttle body, shipped by UPS, so "should" be in my hands sometime next week, fingers fracking crossed
    • I'm so far behind in the jobs I have to do at both work and home (including car) that I have become immortal. There's simply no way that I can die now.
    • Each to their own I guess  Me, I put just as much time into cleaning inside of the cars as I do on the outside As for getting wet, it is really no different than steam cleaning the carpets at home, apart from the cars carpet dries alot faster than the house, again, I only do it in the hotter months and leave the car opened up for a few hours As I only do it yearly, it is just before I do the diff and gearbox service, so I clean the carpets, then it's up on stands, wheels off, service, clean the undercarriage,  grease the bushings and do a nut and bolt check on everything  Disclaimer: I typically had all the time in the world to kill when I was working 🤣, so spending a full day or 2 cleaning, serving and "looking at stuff" was,  easily achievable, and a fun mental therapy day As for time to kill, I retired last Wednesday, so apart from my physical training, my days are filled with lots of random jobs around the house and garden...."Idle hands are the Devils something something" I am also buying a new house sooner rather than later, I'm actually looking at a potential property tomorrow, I'm looking forward to getting a car hoist as I'm starting to get to old to crawl around under a car, I can only imagine all the undercarriage cleaning and looking at stuff when that gets set up
    • Yeah, I'm not interested in wetting the carpets, and I don't care about brown dirt/dust that lives deep in the pile or underneath. It's not like I crawl around on them in my birthday suit or eat dropped food off them (because there is never any open food in my car). The seats are alcantara (cheap Chinese imitation alcantara, to be sure!) with barely 1" of foam pad behind the surface. That's not getting wet either. Any car that I would be happy to get the interior wet, I would not care to put the effort into.
    • We have one that holds 2.8L of water. On floor carpet that hasn't been touched in 2 or 3 years, will take a minimum of 2 fills of the tank to do a bedroom, and that's going AROUND the bed.   In the cruiser, I used an ENTIRE 2.8L tank, just on the front passenger footwell. But it had some fungus growing, and had been full of mud from being used as a 4WD for many years. I can do that floor again, and it will still pull mud out. However, the water now only looks dirty, not pitch black and leaving full sludge in the bottom of the tank it sucks back into. Oh, and, this is about a $1500 unit.
×
×
  • Create New...