Jump to content
SAU Community

Recommended Posts

Yep

Aw shit did you have to ask

Trolling

Guitars

Basketball

Call of Duty: Black Ops 2

Life drawing modeling

Motorbikes

Tennis

Dancing

Gadgets

Getting back massages

Powerlifting

Counselling

Running

Cooking

Singing

Collecting alcohol

Writing

Boom Beach

BDSM

E85

Finding a point of commonality with someone and referring to them as 'brother' in order to receive preferential treatment... That's what you're all about isn't it Mohsen

salamalaykum brudder,

Who wants to buy my excel, cheap cheap very cheap, almost as cheap as the dumplings at those Chinese takeaways next to the milkbar.
Or swap for a motorbike.

Totally miss the bikes in Vietnam or maybe I want to be as cool as birds.

Sorry fellas, my little brother wants to buy it for his first car so keeping it for the mean time.
Was going to be a nice big brother to give it to him but thought I'd be the better brother and make him work and appreciate it! These unappreciative #yolo, #swag, #hipster gen.

I saw Macklemore and Axwell. Your move...

This putsme in an awkward position as admitting I have never heard of Axwell makes me sound even more niche and hipster :/

  • Like 1

Finding a point of commonality with someone and referring to them as 'brother' in order to receive preferential treatment... That's what you're all about isn't it Mohsen

That's the whole northern suburbs brothera

Dam you guys, as much as I'm tempted to sell to you guys now just to get the cash but I'm selling it to my little brother.

It also has lowered king springs which makes it quite fun to drive, has fog lights and the sports kit. lol :thumbsup:

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So, this shouldn't be such a mission, but there were a few tricks so I thought I'd post up a DIY for it. This was on a Q50 Red Sport but I doubt any other V37 model is very different (maybe just less steps for the intake heat exchanger hoses) I pulled the radiator out to flush it because the car was running hot at the track, but obviously the same steps apply for changing a radiator for any reason including an upgrade. If you are removing the radiator, you of course need to drain and refill, so have 5+ litres of blue coolant ready. You don't need to drain the intake heat exchanger to remove the radiator but depending on your plans you may need a couple of litres for that as well. You will also need something to deal with the auto transmission lines, I used 2x 8mm rubber caps on the radiator side, and a short length of 8mm pipe on the car side.....unless you can block these lines quickly you will loose AT fluid and it may be enough to hurt the transmission if you don't refill it. Other than that....lets go... "First, jack up your car". Yes really, and put it safely on stands. If you are not confident doing that you need to give this job to a mechanic
    • If the forester is anything like our old 2007 GTB Liberty, I could near on run ling Long's and "rate them", as no matter what, it just hung to the road, even when abusing it in a hard launch in the wet, or throwing it at corners.
    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
×
×
  • Create New...