Jump to content
SAU Community

300Kw Unopened 25 Club...


Recommended Posts

Your car is inspiring :cheers:

I'm starting from scratch again, got myself a stock-ish R33, well I'm stripping off all the aftermarket parts I don't want then I'm going to slap what I want on. Money Pit Version 2.0 lol

Hope so mate, it's an addictive hobby but well worth it in the end....

I looked at many setups on here and envied them... I wanted what they had... I researched pretty hard and started buying bits, unfortunately I didn't realise when I buy a vital bit there is generally 2 or 3 others that are needed to support it.... Long story short, I learned the hard way and although I am yet to drive the car, the money has justified itself in a figure and video..... I approached JEM 2 years ago with a plan... I was a dreamer I guess, had already purchased the turbo off Ryan so had a start, in 2 years, not at any stage did JEM abandon my plan or thoughts, they were patient and professional, and when the booking time came I handed by pride and joy to them, never thought it would turn our so well... They are amazing and the car is amazing!!!

If you have a 33 then look at "run-it-hard" as he has all sorts of goodies cheap.... Go

Nuts mate!!! I love skylines and more

Mods makes them even better

Link to comment
Share on other sites

Hope so mate, it's an addictive hobby but well worth it in the end....

I looked at many setups on here and envied them... I wanted what they had... I researched pretty hard and started buying bits, unfortunately I didn't realise when I buy a vital bit there is generally 2 or 3 others that are needed to support it.... Long story short, I learned the hard way and although I am yet to drive the car, the money has justified itself in a figure and video..... I approached JEM 2 years ago with a plan... I was a dreamer I guess, had already purchased the turbo off Ryan so had a start, in 2 years, not at any stage did JEM abandon my plan or thoughts, they were patient and professional, and when the booking time came I handed by pride and joy to them, never thought it would turn our so well... They are amazing and the car is amazing!!!

If you have a 33 then look at "run-it-hard" as he has all sorts of goodies cheap.... Go

Nuts mate!!! I love skylines and more

Mods makes them even better

nice work... your spec list and mods is pretty much identiacal to what my neo powered s14 was when it was an all neo set up.. made 360 rwkw also.. was unreal! Motor would still be going today if it wasnt for stupid oil cooler line failing on track :(

Link to comment
Share on other sites

hahahah well said, this is my 3rd RB powered car. I have a feeling this one is going to be cream of the crop for me. Just like the human evolution chart, from apes to humans.

I'm still an ape :woot: But this is my first RB powered car and i am happy to keep it for a long time, fingers crossed i can post in this thread for a long while yet reporting it has survived!

nice work... your spec list and mods is pretty much identiacal to what my neo powered s14 was when it was an all neo set up.. made 360 rwkw also.. was unreal! Motor would still be going today if it wasnt for stupid oil cooler line failing on track :(

I LOVED the sound of that setup, it was intoxicating, was a sad day at the Creek when you reported that failure :( Thanks for answering my painful PM's whilst i was making cam choices, it was hard to find someone with first hand experience. The other 34 JEM did ran 345rwkw on the same boost but had a straight through exhaust so i think it shows that the cams helped peak HP as well as the setups were damn close to identical apart from cams.

The car has just gone through the complete flex tune and is now running on 98 i believe... I should probably have dyno sheets soon...

Cheers guys!

Link to comment
Share on other sites

Have you got any idea what it's putting out on 98?

Be more then 300 obviously, but it'd still be good to know

98 on low boost was only 311rwkw I think... Was about 17-18psi I think... E85 made more than that on 15psi :P

Link to comment
Share on other sites

98 on low boost was only 311rwkw I think... Was about 17-18psi I think... E85 made more than that on 15psi :P

:rant: only 311kw?? id be happy with that... im keen to know how your going to put this power down lol.. semi slicks? no full slicks 285wide?

Edited by SliverS2
Link to comment
Share on other sites

:rant: only 311kw?? id be happy with that... im keen to know how your going to put this power down lol.. semi slicks? no full slicks 285wide?

My heavy right foot will put it to the ground, the tyre will then go to the sky :)

E85 makes a huge difference... If only I had your GTX the power figure would have gone higher... But wank factor aside, 360 is a but silly on street tyres.... Can't wait :D

Link to comment
Share on other sites

and you got heaps of bra's and panties thrown at the car too huh?? hahahaha you were like justin bieber driving by haha

Edited by SliverS2
Link to comment
Share on other sites

and you got heaps of bra's and panties thrown at the car too huh?? hahahaha you were like justin bieber driving by haha

If he had an Atmo BOV then of course...

Keep it on topic guys, 300 or GTFO :P finally I can say that lol

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I got the full frenchys kit too. Really awesome kit. Easy to install my only complaint was the hardlines I think could be routed differently (I modified mine) but I realise the kit needs to suit multiple applications. This was the hard lines before I modified them. They were touching the wastegate pipe. I ended up reducing the distance between firewall and first bend. The made it so they tucked along the frame rail.
    • Deeve, I don't suppose that you've made any progress on this? My Stagea has the exact same problem, and just like you, I've read through as much as I can online, with no real progress. My car isn't throwing any codes at all, which is a little frustrating. I've changed plugs, checked the wiring and harness. A new MAF gets here next week, but I'm not hopeful it will solve the issue.
    • I installed it all myself,  It was really easy to install.  I got a professional to do the degas/gas.
    • Finally had some time after working on other projects to jump back on this thing. Pulled all 4 wheels to check the brakes over and lucked out, only needed to bleed them/change fluid to get everything working!    Took it for its first quick spin (around 2km) up the road and ran great! Sounds like I have a left rear wheel bearing that needs replacing and there’s a shake in the steering wheel but the tires are absolutely junk on this thing and had been sitting flat when I went to first look at the car so we’ll see if that’s the cause.   Tach randomly started working but I notice if my hicas light comes on the tach stops working 🙃 yay for electrical gremlins 
    • Bunnings car park it is! if you buy the kind of dampers with the adjustable top on the strut you can see it, red, purple? So many options.
×
×
  • Create New...