Jump to content
SAU Community

Recommended Posts

Test fitted some wheels.

F - 9 +30, 255

R - 10 +38, 295

With about 2.5 deg camber on the rear it was slightly pokey, and flush with 2 deg camber on the front.

Decided to go with,

F - 9 +35

R - 9.5 +38

RPF1s on their way from japan, hope this helps anyone looking to go big.

10588654_814795625218233_842044625_n1_zp

10585598_814803338550795_616279295_n_zps

  • 4 weeks later...
  • 3 weeks later...

I put on something similar Koya Cr Tek 18 x 8.5 +32 offset all round with Federal 595 235x 40x 18

Car is GTT r34.

Had the original wheela on it before handles excellent. No guard rolling.

  • 2 months later...

I want 18x9.5 inch all round, rears im fine with +38 but for the fronts its hard to find out exactly what offset i would need.

I would prefer no gaurd roll back can do if scraping.

Would +35 front be ok?

9.5 + 35 probably wont clear the inner suspension on the front.

You would probably need to go for a much lower offset if you want 9.5 on the front.

I went 18x9.5 +22, Volk Racing TE37SL's with 245/35/18 tyres.

Guards are rolled just to be safe and car is lowered w Coilovers.

Clears the plastic lining in the front with no rubbing at all.

Slightest poke on the front but hardly noticeable.

IMG_87292222_zpsc5b30122.jpg

10834093_10153371011077571_1859539448_n_

10743558_10153312105092571_69778459_n_zp

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...