Lets Talk Water Meth Injection

[JustinP]

Yeah I understand that

I will be running 50/50 with the tune.

Everyone can drive off boost so even of I run out its not the end of the world you can still drive around off boost right? Just not thrash it

If you did that you would have to be extremely careful not to ever come onto boost if you had really ramped up the boost / timing with the WM mixture injecting. Otherwise good bye motor very very quickly! I wouldn't feel comfortable driving it around like that for any period of time!

Just get a float sensor for the tank and a warning light, and carry some extra WM with you. Or invest in a failsafe device.

I recently bought the AEM failsafe device which looks very good. I will use it to trigger a second map in the ECU.

[GTScotT]

Hes got a float sensor/warning light already yeah.

I would aim to have it tuned with 2 stages of boost, where the low boost is perfectly fine without the WMI and the high boost is WMI dependant.

Best of both worlds

[Manuel Kasko]

Thought about that dude

But I want it working from 8 or so psi not my low boost setting. I guess I will just always keep a 50/50 mix around in the car

[Mitcho_7]

Maybe get a fail safe and wire it up so that it will kill the power/remove the ground to your boost controller when it's triggered. That way if you run out it'll just run off gate pressure which is better than nothing...

Pretty sure snow make a safe injection/fail safe type thing, but most brands will probably work with your kit.

Edited December 14, 2012 by Mitcho_7

[Manuel Kasko]

My actuator is a 20psi one haha

Otherwise I would do that.

Might swap it for a 16 with stao before I get the tune

[t_revz]

Hook the fail safe to the fuel pump so it stops pumping and trying to accelerate if the tank gets empty

Stao does a 14psi actuator. Works fine on mine

[Manuel Kasko]

Lol fuel pump?! Surely that's a troll

I guess I will go for the 14psi so then I can easily run and low and high boost as well which would be convenient

[Manuel Kasko]

Just had a look at the kit

So it comes with the following.

175ML/MN

375ML/MN

625ML/MN

Guessing the best is going to be the 375

[t_revz]

I would use that one if I was you, at least at first. I'm going 550 with SS2 using 50/50. Since your only using water for now 375 will be heaps

[jet_r31]

Use the 375, its overkill... if that what you actually get out of it(375cc per minute), i really doubt youd go bigger

meth or no meth, it "should" be enough to make 350rwkw or more

[Manuel Kasko]

Good to hear thanks mate.

Might try install it just after Christmas

Or maybe get half installed this week

[blk94r33]

Progress?

[Manuel Kasko]

Diff has pretty much failed so no progress

The kit is still sitting in its box at home

[AngryRB]

Diff has pretty much failed so no progress

The kit is still sitting in its box at home

time to get the guy from the chopper on the job .. lol .. seemed to know what he was doing..

[Manuel Kasko]

time to get the guy from the chopper on the job .. lol .. seemed to know what he was doing..

Lol you love that guy Mark

So the diff was taken out this weekend and should be getting a look over this week by the diff peeps.

[jet_r31]

Im going to try install a air/water atomiser inbetween the turbo and airflow meter and see if it works. Get rid of the pump

system. Don't know anyone thats tried it so will be suck and see, to see if the air upsets anything...

cheers

darren

[Manuel Kasko]

Darren - Getting shit done since 1990

[GTSBoy]

Compressor wheel erosion will occur.

[Manuel Kasko]

Compressor wheel erosion will occur.

If it's a stream of water- Yes

If it's very fine mist - No

[jet_r31]

Compressor wheel erosion will occur.

Errr, i know you know a lot...but your wrong this time, very wrong ..done it heaps of times...only air sprays wear out wheels..air/atomisers do not

the air side of breaks the water down into much more fine microns than shitty arse chinese bilge pump setup...lol. My coolingmist

kit even with there new fange dangled super atomiser is no where near as fine as my air/water atomiser....

I have done this, more than once... so i speak from experience, i didn't read about it on the net inbetween masturbating

on redtube..lmao

cheers

darren

Edited February 11, 2013 by jet_r31