Jump to content
SAU Community

Recommended Posts

I may have made a mistake, my pump kit came with a black rubber sock/sleeve that goes over the pump for when it's mounted externally to stop vibrations etc while clamped down....

I put that around the body of the pump submerged in the tank in ethanol....I'm going to check it this avo I have a feeling it's starting to perish and block the intake sock on the pump lol

  • 1 year later...

Sorry about the thread revival guys, but I am at a moot point regarding fuel pumps and it is driving me mad.

What I plan on doing is running a pump on its own (With the intentions of it becoming a lift pump once I need more fuel).

I have a brand new Nismo 275lph @ 80psi pump sitting in a box wrapped in plastic. I've been told not to use it for E85, and I want to use E85. People have told me to get a Walbro 400lph pump which is E85 compatible. So I did some homework:

The walbro 400lph isn't exactly that. (I have attached flow diagrams)

It flows 315lph at 70psi (45psi base, 25psi of boost)

Nismo flows 275lph @ 80 psi which I estimate to be over 300lph at 70psi.

Anyway - should I just drop the Nismo in and run E85 through it and be done with it?

I love Nismo pumps. So quiet, small, and, its Nismo!

post-7271-0-88763900-1407373396_thumb.jpg

The ethanol version of the Walbro is absolutely silent, quieter than the Nismo/Tomei pumps. It uses a turbine vane, not an oil pump style gear type of old.

If you want ethanol compatibility there is only one choice, that said, you may get many years out of the Nismo. Personally I would sell the Nismo off and buy the 460 Walbro, and pocket the change.

Mr Mafia is that the R33 GTR or GTS25T Nismo pump ?

Personally I think an EFI pump that draws 18-20 amps on its own is hardly current tech electrics . I think the GTR Nismo is advertised as drawing 8 or 9 .

A .

R34 GTR Nismo pump Disco stu :)

If it's a 8-9 amp pump, what does this mean for me?

And works with the factory fpcm, but I don't think Mafia needs that. :P

haha actually... yes I do. I am running a Nistune (R32 GTR ECU in my R34 GTR). Works really well.

R34 GTR Nismo pump Disco stu :)

If it's a 8-9 amp pump, what does this mean for me?

haha actually... yes I do. I am running a Nistune (R32 GTR ECU in my R34 GTR). Works really well.

Have you, or are you planning to direct wire the pump through a relay? The stock wiring won't support the Walbro.

Twice the current draw from a battery that's sometimes not real close to the alternator .

I haven't looked that closely into the fuel pump control modules , basically they are like a ballast resistor with a fancy relay to bypass it when the computer says so . With GTRs the FPCM has two stages or resistors and the usual bypass . Nissans like the Q45 V8s in the US use the same type of thing and at one of their sites they have pics of them opened up and in various stages of melt down - literally .

Their purpose was to minimise the amount of fuel doing circuits at low revs and loads and to shut the pump up to a degree .

The upshot is that the standard wiring won't appreciate more than double the fuel pumps normal current draw which is why the bolt in Nismo pump works with the standard system .

One feller many years ago reckoned an easy way is to leave the std or similar pump in tank and run an external pump to do the hard stuff . A standardish pump should easily cope feeding into the external because its not creating the rails pressure head on its own . . And its not like either pump can run away speed wise because all the fuel is going to the same place . External pumps make the wiring easy because there's no fuel tank to feed/seal wires into . Bonus is they're easy to change if you mount them in an accessible place .

In a way running pumps in circuit is like running several in tank because logically the fuel all goes to the same place . The difference is that running them in series rather than parallel means they share the work load and if primary isn't a gorilla pump it doesn't matter . If the external tries to pump more than the in tank its flow increases because the effective pressure ahead is less .

A .

which is why the bolt in Nismo pump works with the standard system .

No, the Nismo works on the stock system because it is designed to run on low voltage, and not draw too much current for the stock wiring when doing so. Try running a Walbro 255 on stock cruise voltages and you will find it doesn't last very long.

Personally I run twin 255's for that very reason, more flow for less current, but they are not ethanol rated. These days I would be dropping an e85 460 in, as I am doing to my evo this week.

Running the stock pump with an inline after it is a good idea, but you would need to match the sizes of the pumps. No way a little 20 year old oem stock pump will flow enough to keep up with a decent inline, and that would cause all sorts of problems.

  • 4 weeks later...

lol so I am still confused. Should I just use the Nismo for my intank pump for E85, and then upgrade to a surge tank when I need more and then use the nismo as a lift pump?

Thats what I did had the nismo initially and then it became my lift pump when I went surge so far 4 years on e85 and no problem.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
    • After @Kinkstaah debacle, I'd never want to try and get it right 😛
    • The hood lines up with the fenders. The front bar doesn't perfectly line up with the fenders where the wheel arch is. You have to 'squeeze' the front bar 'in' as it wants to naturally flare out and be longer on the sides. There's a few threads where people notice this when they only swap a GTR style bumper and front bar. Unless you have genuine OEM items - you may be better served getting conversion kits. There are GTT bumpers to fit GTR hoods. There are GTR hoods (non genuine) to fit the GTT bracketry. MAY  
×
×
  • Create New...