Jump to content
SAU Community

Recommended Posts

I agree, turn down the wick mate and enjoy...besides, your car is stupidly or cn I say dangerously powerful

slap stocker box in

adjust wastegates to 17pis

enjoy for a long time without issues

will save you 7k

downside is less blokes on here humping your leg due to awesome output

I agree, turn down the wick mate and enjoy...besides, your car is stupidly or cn I say dangerously powerful

It's at 25 psi man. Hardly "screwing its brains out" and realistically I haven't run over 22 psi at all which is less than what most people run on -5's. if I turn it down I may aswell drop back a turbo size. There are associated costs with doing that too.

sorry to hear bout the box :(

interesting though, with E85 and new turbo tech, starting to really push the boundaries of what street cars would normally have to contend with. Maybe you'll create a market for a street-able bullet proof gearbox option - but you've unwittingly created a bit of a "ceiling" for what people might be considering build wise as well... (With respects to gearboxes)

not sure if it's of much help, but i recently found out i have 33 v-spec ratio diffs (like a god damn kinder surprise this car) soooo... i have a getrag and 33 diffs... if you're in melb anytime soon, you're welcome to take it for a drive if you like, see what you think. She might be a bit slow for you, but she goes alright :D

Torque ratings ain't high enough. Try again lol

Phone them. I bet higher ratings are available.

If you had a high reving 2.6 with less torque, this wouldn't be a problem.

Edited by black bnr32

sorry to hear bout the box :(

interesting though, with E85 and new turbo tech, starting to really push the boundaries of what street cars would normally have to contend with. Maybe you'll create a market for a street-able bullet proof gearbox option - but you've unwittingly created a bit of a "ceiling" for what people might be considering build wise as well... (With respects to gearboxes)

not sure if it's of much help, but i recently found out i have 33 v-spec ratio diffs (like a god damn kinder surprise this car) soooo... i have a getrag and 33 diffs... if you're in melb anytime soon, you're welcome to take it for a drive if you like, see what you think. She might be a bit slow for you, but she goes alright :D

I believe he is in Vic ATM for DECA this weekend, what revs does it sit on at 110

go on Paulie get the OS88, you know deep down you want it, and then I can take it for a drive and see if I want one :P

sorry to hear bout the box :(

interesting though, with E85 and new turbo tech, starting to really push the boundaries of what street cars would normally have to contend with. Maybe you'll create a market for a street-able bullet proof gearbox option - but you've unwittingly created a bit of a "ceiling" for what people might be considering build wise as well... (With respects to gearboxes)

not sure if it's of much help, but i recently found out i have 33 v-spec ratio diffs (like a god damn kinder surprise this car) soooo... i have a getrag and 33 diffs... if you're in melb anytime soon, you're welcome to take it for a drive if you like, see what you think. She might be a bit slow for you, but she goes alright :D

What timing! I'm actually in Melbourne right now! Thanks for the offer Dan. Flick me your number so we can organise something. That would be fantastic. I've always wanted to launch a Nur spec from 10,000 RPM :P

What a great clip.

that thing is an animal!

Is it just me or does the gear changing sound slow for a sequential box? I don't know much about them so maybe there is a setting for gear change delay.

may the sequential be with you... always

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • HELP   Hey all, Is there an accelerator cable from another Nissan that can be used on the R33 GTST RB25DET with a Greddy forward facing plenum?  Thanks in advance  Rob 
    • Or do we think it was installed to give 1 bar of boost max, all day, everyday?
    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
×
×
  • Create New...