Jump to content
SAU Community

M35 6 Speed Conversion.

scotty nm35

By scotty nm35,
in Four Door Family & Wagoneers

 Share

Recommended Posts

scotty nm35 Grand Master

scotty nm35

Posted
Posted

After melting another gearbox at Phillip Island last weekend and generally getting sick of the auto I have decided to go rear drive for the time being. The decision wasn't rushed, I have been having many trans issues recently due to clutch wear, clogging of the filters and it will require another rebuild very soon.

Rather than throw more cash down the drain I just purchased a 350Z 6 speed for a reasonable price, and it includes most of the parts I will require to convert to manual. Hopefully no headaches with fitting it but it's anyone's guess what the car will do with the gearbox and tcu missing in action. As long as the throttle and cams still operate I will be happy. The speedo should still work fine as it works off the wheel sensors, as should the abs etc.

This is a similar kit to what I bought, I doubt the carbon tailshaft will bolt in though. I will have to use the yolk and cut the Stagea one down I guess.

Is there anything else I have forgotten? Fitting the clutch master should be interesting. :unsure:

post-63525-0-35839100-1346767764_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/408555-m35-6-speed-conversion/
Share on other sites
  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Posted Images

scotty nm35 Grand Master

scotty nm35

Posted
  • Author
Posted

Yes, the only part I still require I think. Worst case I could buy the handbrake assembly from Nissan I guess but if anyone knows of a manual V35 wreck about, let me know please. :)

May require the V35 brake pedal itself also, just to make the pad smaller, although the existing handbrake pedal fits no problem...

Sunkist Grand Master

Sunkist

Posted
Posted

you could probably get away with a button, but a twin plate will definitely be better, and feel almost stock if they are organic plates!

if i see something at pickles ill let you know.

im actually really interested to see this happen!

Tommy Kaira RL Mentor

Tommy Kaira RL

Posted
Posted

You might have to earth out the neutral signal into the ECU. I changed a 33 from auto to manual and every time I went past neutral the engine would rev. It could be the same for the M35.

Turning the Stagea into a drift car?

Commsman Veteran

Commsman

Posted
Posted

Very cool if you can get this to work Scotty.

Have you measured where the shifter will be wrt your seating position? Looking at the pic it appears you may need a rear seat passenger for gear changing duties.. lol. Could just be my imagination tho.

Sunkist Grand Master

Sunkist

Posted
Posted

Very cool if you can get this to work Scotty.

Have you measured where the shifter will be wrt your seating position? Looking at the pic it appears you may need a rear seat passenger for gear changing duties.. lol. Could just be my imagination tho.

i think you maybe right, for the 350z they come with a sort of spacer styled shifter, but i gues it could be fixed with a simple v35 shifter IF it is a problem

iamhe77 Grand Master

iamhe77

Posted
Posted

Yes, the only part I still require I think. Worst case I could buy the handbrake assembly from Nissan I guess but if anyone knows of a manual V35 wreck about, let me know please. :)

May require the V35 brake pedal itself also, just to make the pad smaller, although the existing handbrake pedal fits no problem...

Should be able to bring up those items for the 350s (handbrake, pedals, centre console etc etc)

Same interior style as yours.

Axis350Sinterior.jpg

Axis350Scentreconsole.jpg

PN-Mad Grand Master

PN-Mad

Posted
Posted

Going to be the same console as a v35, isn't it cam?

I am excite. Plenty of v35 wrecks about and the parts shouldn't be too sought after/expensive either. The foot brake will go, yeah, the master cyl will be the interesting one.

ECR33_RB25DET Community Regular

ECR33_RB25DET

Posted
Posted

Certainly looking forward to progress of this conversion.

I have done EF Falcon auto to manual and my R33 auto to manual, they were both straight forward challenges. This one is bound to have some hurdles....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Erelyes
      Ceramic turbine damage to engine - what did yours do?

      By Erelyes · Posted

      Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Dose Pipe Sutututu
      M35 Aftermarket Fuel Pump

      By Dose Pipe Sutututu · Posted

      Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • GTSBoy
      RB25 Drama's

      By GTSBoy · Posted

      Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • iain_ST44GA
      M35 Aftermarket Fuel Pump

      By iain_ST44GA · Posted

      also possibly backed up to my filler and shat down it! 🤣
    • Julsmadrid
      RB25 Drama's

      By Julsmadrid · Posted

      Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
×
×
  • Create New...