Jump to content
SAU Community

Recommended Posts

They are cheap, and nasty, but with a bit of die grinding, and re-machining of the flanges perhaps(they are only linished by the looks of it) they can be a good option for guys on a budget.

I had to modify the wastegate path on one I had here, as it was going to hit the dump, but it all bolted up fine. Messy mig weld on the inside of the merge was a bit... :/

Mine was also pretty good quality with the collector being pretty clean inside, only complaint I've got is, the 4 bolt flange one of the holes is off centre so it makes it hard 2 slide a turbo over the studs or a gasket 4 that matter :(

post-83626-0-43966800-1384426622_thumb.jpg

Edited by methz
  • 2 years later...
On 8/24/2016 at 10:19 AM, Ke55pig said:

 

So after four years about 20 track days and 10 thousand st ks my hyprid has crumbly cracked welds in the collector no one wants to fix it so time to buy  six boost

 

that seems like a good value . $600 for 4 years

 

16 minutes ago, Dose Pipe Sutututu said:

twin scroll manifold.. then one day get a better turbo :)

Theres no real gains or point for  twin scroll if not using a twin scroll turbo ??

 

26 minutes ago, zebra said:

I would have thrown the manifold through his front window if that happened to me

or weld it to a gearbox and put on the door step.

 

Funnily enough, i contacted hybrid at the start of the week about their low mount manifold, as they're fairly cheap.

I asked about warranty for cracks, re surfacing and warping. They dodged the warranty question but mentioned they have never had a single manifold crack. Send them these pictures. I'm sure it won't be the first ones they've seen though :ninja: 

 

Thanks to dose mang, i am now going to go through havoc performance.

Touch wood - mine has given zero problems over a few years of track only use.  I expect it will stay that way.

Have to check my race diary but about 12 events consisting of practice day then 2 race days for the weekend.  A bit more demanding than a typical half day event offering 4-5 sessions.

However - I did not just unpack and then bolt on.  Spent about 2 hours with die grinder and grit blasted the hand finished result.  Then had it ceramic coated.  It has proven fit for purpose and application at the power level I'm running.

Any of these fabricated manifolds "should" be checked and given some finishing if warranted.  It's a matter of observing due diligence and preparing things for reliability.

I'm certain that there's some far better manifolds out there, simply that the user pays for the prep and finishing.

My ETM 1jz  manifold is perfect.

 

If I ever build another turbo car I'd never use a cheap manifold. I have in the past and found they are aweful.

 

Compare the collector / merge of a good manifold to the ones above and you can see what you pay for.

 

Prep and finish should be done by the manufacturer no matter how cheap the manifold is. 5 minutes with a die grinder might make it look ok. But shit welds will still crack and break off and destroy shit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah well per the video it took 15s for the stock unit to start up....even if I give it a few seconds discount for starting that is at least 12 sec before you get a reverse camera if you are trying to leave a park.  The android unit is way faster, but 2016 for the stock unit is a long time ago in consumer electronics
    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
×
×
  • Create New...