Jump to content
SAU Community

Recommended Posts

Also looking at getting a PAR dog engagement gearset, 1st-4th, pretty cheap. Any reccomendations?

All I'll say is - do your research. Enough info just on this forum alone to make a decision about that type of thing...

PPG Dogboxes seems to be the strongest on the market at the moment, I have great results with mine. Just remember to upgrade the stock sandwich plate with a billet item cause if that fails then everything will as well. Have done over 50+ runs, all over 800-1000awhp going through it, you wear clutches out before the gearbox I highly recommend them.

there goes that idea then! must remember, you get what you pay for -.-

man up and get an OS88 sequential! :P

but def keep us posted as to what you do because ill be heading down the same path shortly so will be interested to see which way you go

Edited by Frosty

Hi everyone,

About time we posted this up - here are the specs on our "NITTO" R34 GT-R:

STANDARD RB26DETT bottom end

ARP headstuds

Nitto Headgasket

Standard oil pump

Custom head by Mercury Motorsport

6Boost mani

Precision 7675BB turbo

Twin Precision wastegates

4" exhaust custom made

Haltech Platinum Pro ECU etc.

Upgraded fuel system

Splitfire coils

100mm thick FMIC

Custom i/c piping

OS Giken sequential gearbox

Power: 622awkw/845awhp @ 43psi (ran in 5th gear, to keep the 1:1 ratio due to gear changes, 6 straps holding it down)

Nicely done. It's no easy feat to make 850hp but glad to see you finally decided to run it and put the shit talkers to rest.

I can gladly agree that you indeed make over 800hp and am very interested to see you push that stocker as far as it will let you. At this point, even if it broke, you're currently making more hp than any other stock RB26 that I know of. Well done

Not sure if you are talking about Oz, or in the world... but Manny Cruz in the States claimed ~950whp for the stock bottom end RB26 he had in his Sentra drag car back in 2005, lots of people called BS - though the car ran mid 7s at >170mph and there is no reason for him to have lied about the internals - DSport in the US also had an R33 GTR they were claiming ~800whp for a few years ago with twin RX6s on the stock motor IIRC.

Not when it weighs 1700kg

It would either need that power with 1400kg to run 150 or it would need to make 1000hp at the weight it is.

Cheers Dan...

The Powertune GTR weighs 1800kgs including driver (we thought 1700kgs too, but speaking with Chea, it was 1800). Anthony & Trent are about the same weight & both cars are in full street trim with big brakes. We'll weigh NITTO in due course! :)

Mates vl calais 1400kg plus driver, with 385rwkw ran 139mph.

Same guy now has aprox 550rwkw vl running 9.0@155 mph.

I'd be more inclined to question those figures than Powertune's - but you can't compare them straight up anyway, unless the VL also bogged, and was running 20" rims wearing low profile basic street tyres. 142mph in a full weight honest street spec GTR with a 2.6litre engine (with stock internals so probably not big rpm) is insane, anyone knocking the time or power figures really outta take stock for moment.

I just copied this from another post......

I just ran our NITTO R34 GTR at the drags on saturday at Willowbank.

Ran a 10.39@142mph on Hero 255/30R20 tyres, Tein Monoflex coilovers, OS88 gearbox, standard 05U rb26 with precision 7675 turbo making 845hp @ all four wheels.

1.77 60ft

4.69 330ft

6.9 1/8mile (107mph)

8.799 1000ft

10.39 1/4mile (142mph)

Mates vl calais 1400kg plus driver, with 385rwkw ran 139mph.

Same guy now has aprox 550rwkw vl running 9.0@155 mph.

Slicks and auto vs Street tyres and manual... Thus why you can't compare times and mph

Edited by SimonR32

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...