Jump to content
SAU Community

Recommended Posts

http://www.sau.com.au/forums/topic/84208-wheel-sizes-offsets-for-skylines/?p=7471653

Above is what I've got atm 18x9.5 +15 with 265/35/18 stock suspension, no work done, just liners out

sitting pretty high up in space atm...

  • Like 1
  • 2 weeks later...

Looks awesome driven over a bump yet

Does racing around a track and running over apexes count?

Actually the front right very slighty rubbed on the screw holding in the inner lining of the front drivers side. I bent it up with my hand (good old ally guards) and she was sweet :)

  • Like 1

Would have though there would be epic guard v tyre at the rear

Nah I tested it before I took it out, got 3/4mm clearance to the rolled guards under compression (jacked it up front front corners). Plus add some tyre deflection under cornering would add a few more mm clearance

So had a fairly big week last week with the car, went down to No Limits and broke my lap record for a street car with a 60.19 which is within 1 sec of the best qualifying time the Group-A cars did back when they were racing. Also so close to a 59sec lap which would be a huge barrier for a street car.

natsoft%20no%20limits_zpspsgubd7n.jpg

Also managed to take out the latest round of the State Speed Event Series which I don't think has ever been done before in a registered car, let alone a closed car. The competition in this is significantly better than your average time attack so I was very happy with the overall and class win

natsoft%20speed%20event_zpsaupdowjh.jpg

IMAG0488_zpsxqvndafi.jpg

Edited by SimonR32
  • Like 2
  • 2 weeks later...
  • 1 month later...

Any more action lately? I havent been able to stalk with no updates :P

Well did round 7 of the State and came first, one round left and I've almost got it in the bag. Have to come in top 15 to win the series (worst I've come in the dry is 2nd).

Also did Powercruise on the weekend, first year I have not broken the car which was good and managed to come 2nd in off street drags. Lost to a 32GTR with 3.4L GTX42, Holinger and ET Streets

Edited by SimonR32
  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...