Jump to content
SAU Community

Recommended Posts

Hey guys, just adding to this thread, who knows of a good shop to take for brake upgrades/repairs? I'm thinking of upgrading the stagea to Brembo's or R34 rotors and calipers as the Stagea feels like it's running on excel brakes at the moment. Any advice appreciated

Do it yourself, its fairly easy, ive just done a biggish upgrade on my R32, only dramas i had with mine was a couple of seized bolts on the brake lines where i had to take the old rubber hoses off to fit the braided lines, so if you dont plan to change the lines it won t be too hard

As i'm sure many of you are aware, i will soon be the proud owner of an R33 Series II. I live in the Tuggeranong area and was wondering where i should go to get my car serviced, who is recommended and more importantly who to keep away from. I heard the mechanic at EVO motorsport is pretty good, does anyone here use him?

Thanks in advance.

Never ever take a car to Evo motorsports. I don't know a single person who has gone there and not been ripped off. Hell, I even know a kid who did work experience there, that they got to put the head on an S2000, he'd never touched a car in his life before that.

Personally I recomend Trojan Motorsport www.trojanmotorsport.com.au Trojan Motorsport , they have a few big R33's, and a couple of R32's and R34's coming out of there frequently. Both the boys John and John have either had or have Skylines themselves, and they're pretty much their bread and butter. Never heard anyone have a genuine complaint about them.

Dan.

yea i think the guy that owns trojan or one of the guys that works their has an account on here as he messaged me a while ago when i was looking for some wheels. Damn they had some hot skylines. a silver 33 with silver r34 gtr mags lowered mmmmmmm looked awesome

Ok, thanks.  I guess i'd better just make sure they fit the Stagea, which i'm going to assume is close to either R33 or R34 bits

No worries, give me a yell if you want a hand if you DIY it

Gus, HUGE improvement, like you wouldnt believe

Is Ed still at integra automotive? Any one got a phone number?

Also regarding EVO, has anybody actually HAD any experience with them?

No-one seems to be saying why they are so bad and why we should avoid them.

thnx.

Never ever take a car to Evo motorsports. I don't know a single person who has gone there and not been ripped off. Hell, I even know a kid who did work experience there, that they got to put the head on an S2000, he'd never touched a car in his life before that.

Personally I recomend Trojan Motorsport www.trojanmotorsport.com.au Trojan Motorsport , they have a few big R33's, and a couple of R32's and R34's coming out of there frequently. Both the boys John and John have either had or have Skylines themselves, and they're pretty much their bread and butter. Never heard anyone have a genuine complaint about them.

Dan.

Thats who I only use to do stuff I cant on my car

My mate went to EVO the other day and he purchased a hybrid front mount kit and had it installed. He also brang along an AVCR and got them to install it and also to tune it up on the dyno. Total cost = $1700.00 and it took them about 7.5 hrs all up.

I need to get my AVCR installed and tuned up with my power fc. Anyone got a rough idea of what this should cost? Is Trojan or Integra good with tuning power fc's?

Also regarding EVO, has anybody actually HAD any experience with them?  

No-one seems to be saying why they are so bad and why we should avoid them.

I knew a guy who took his R34 GTT along to them, he had no complaints.

But i also knew of a guy with a Sil80 who took it to EVO to get some work done and they messed it up, he had to take it elsewhere to get the original work done again, and fix the things they'd stuffed up. Dunno what he had done to it though. Heard about it all through his sister.

Another Trojan warrior here! They know there stuff down there!

Yeah not to bad, thats where I got my car from.

As for tuning PFC's I would spend the extra money and take it to sydney. But trojan are great for everything they will get someone to tune it if you like.

All trojan do is work on imports so thats there bread and butter.

i would'nt take my power fc to be tuned at Integra, purely because Ed admitts himself that he still has a bit to learn about them, and a couple of the guys tuning results hav'nt been to great just recently.

So it seems that EVO have been flamed in this thread by people that havent actually dealt with them.

I had them (EVO) install and tune my power fc a few months ago - not a problem. Cost was probably a bit high - $450 but we had issues with my plugs and they did a few runs on the Dyno before it was all good. Since then I have had a few knock issues so Im due for another tune. I think I'll give EVO another go.

Who else can recommend a power fc tuner in or around ACT?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Car has been running great, I've put about 300km's of break in time on it. First thing that stands out with properly sealing rings is no more noticeable crankcase smell coming out of my catch can. This may seem insignificant, but the constant smell while driving around was infuriating. It's also nice to see my oil level remain stable. Two new issues have developed that I only noticed this weekend though. There's a very noticeable driveline vibration past 100kmh. I only noticed it now as I've been babying it under 100kmh in the backroads. This comes as no surprise as I'm running a one-piece shaft, and I paid zero attention to my driveshaft angle when I put everything back in. I also have a fair bit of voltage drop on hot starts. The starter audibly is forcing. No issues on cold start though. I must not have removed all the paint under my main block ground during assembly. I'll try and take care of both those issues this week once the kids are asleep.  I also received all the parts I was missing for my direct port setup. I will hopefully have pictures of that up soon. I'm hoping to get back on the dyno the week of June 30th as I'll be on vacation. I'm confident I should be able to make north of 500rwkw on pump gas and WMI. I'll go back again later this summer with E98, but I want to confirm my ethanol content sensor is working properly first. I've never seen it read anything but 11%. This makes sense for our 10% ethanol content pump gas here, but I would expect the occasional movement between fill ups. 
    • 75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
    • Trailer prep is underway... Lined up the wheel to get a rough indication of how it would sit Then removed all the bits (as far as possible) and gave the frame a light sand and quick lick of paint   Then added some carpet
    • okay, so I figured this out, removed needles and reinstalled after swapping the gauge face on my triple gauge for my ER34, all work and look good. I tried to do the same for the main cluster, but the main cluster gauge faces are dished, the replacement gauge face are flat, so due to the dish in the org face ,mounting backing plate (clear) and depth of the needle, the flat gauge face will not work. I notice that R34 gtr gauges are flat, appears to be different clear backing plate that aren't dished. are these available, or what have others done to install flat gauge faces?
    • Cheers mate. Seems some people get lucky others don't. It looks like the motor was detonating (to be expected if it was overboosting I suppose) as the pistons had a lot of detonation damage, and the bearings were stuffed. The bores were very scoured too, not sure if that's from the pistons or bits of ceramic turbo. By the by now. Have been trying to avoid the rabbit hole too much on the rebuild, and there's been a few hurdles along the way, but with any luck I'll have the car back soon™. Might even pop up a thread then.  
×
×
  • Create New...