Jump to content
SAU Community

Recommended Posts

Everyone dont be stupid to go to EVO MOTORSPORT cause when you give your car there for service or for them to tune your car the guys doing it will take it for a test run and give heaps of preassure to your car like doing burnouts, drifting and giving high revs ive seen it happen and heard heaps bad things about them from the boys in Canberra... I heard that Ed from Integra Automotive is the place to go if you want good tuning and service cause he realy is a good bloke to realie on and trust him to take good care of your care so id suggest to everyone to see him!

Id have to agree with him, NEVA go to EVO, bad stories and experiences. Ben (their old mechanic knows his stuff; Hence OLD mechanic) but Chris is arrogant and talks shit IMO. I recomend jakes or the mawson servo. :rofl:

Has anyone dealt with Trojan in Mitchell? A bloke at work had problems tracking down an intermittent issue, and Trojan were the only ones to figure it out. He had been to a couple of reputable shope prior to that. I'm dropping my car in on Tuesday so they can check out some odd noises and my 'flat spot', but I'd like to hear if anyone else has used them, and whether they are sharks. The bloke who runs the shop seems to know his stuff, at least to my uneducated ears.

The two John's at Trojan did a good job on the GTR today. They fixed the bits I asked to be fixed, and told me how much it was likely to cost for problems they found. There was nothing done that I didn't ask for, or that I didn't expect. They also spent a fair bit of time explaining things to me, which I appreciated. I'd use them again.

Ok here we go...

Again, this is just the truth.

I got a quote from EVO to get some work done (Front mount, pump, regulator - the usual), looked ok and I thought I'd get it done (before I found the forums).

When I picked my car up it had rubber in the rear gaurds. I was pretty suss of that, and wasn't offered an explination.

They told me it had 176 kws (flywheel) which I doubt, it was running WORSE than before.

I was charged $500 more than my quote, which was not explained.

Then, on the way home my boost controller blows (power down, no lights). Im going WTF?? Get home, find there is no gromet for the wiring. Its of course shorted.

Get it on a hoist, no hi flow cat that I paid for, although mine had been gutted. Was charged $400 for this. They were not happy that I found this, and claimed it was a hiflow. After many calls they are sending me a part, however I will not see any labour.

Oh, also left 3 boost leaks, Boost gauge stopped working after 2 weeks.

It caused a rethink of the way I wanted to make power, however it wasn't a cheap lesson.

Play with care.

Dyno tuning is money well spent :D

Yeah - I looked at going to consumer affairs, but right now I'm just hoping I have a part in the mail. Its better than the nothing I'll get otherwise.

GTaaargh and Skylinegal:

Trojan are the boys that look after my baby for me. They do very good work at very very good prices!I cant give them a big enough rap! They have taken the time to go over everything i'm planning to do to the line with me and have been happy to show me exactly what the G.O is. I have also seen the other cars they have produced and im very impressed.

GTaaargh and Skylinegal:

Trojan are the boys that look after my baby for me. They do very good work at very very good prices!I cant give them a big enough rap! They have taken the time to go over everything i'm planning to do to the line with me and have been happy to show me exactly what the G.O is. I have also seen the other cars they have produced and im very impressed.

for example mine and cons 33, They look after me as well so big rap for the boys too. One thing they will be useing Jakes Dyno with them there to help

for example mine and cons 33,  They look after me as well so big rap for the boys too.  One thing they will be useing Jakes Dyno with them there to help

Shaun you need all tha damn help you can get with your car and the way you break it HAHAHAHAHAHA..... i keep telling you every time i am down to let me teach you how to drive and that bike of yours HAHAHA RALMAO :headspin: :wassup:

I had my wheels aligned at Tyre Power in Tuggeranong. They did a top notch job, and it was a damn good price too. I spotted them taking my car for a test drive to make sure it was running ok, and i was happy to see the driver taking it nice and slow and not revving it up the road. Definately be going back to them again.

  • 3 weeks later...
Shaun you need all tha damn help you can get with your car and the way you break it HAHAHAHAHAHA..... i keep telling you every time i am down to let me teach you how to drive and that bike of yours HAHAHA RALMAO :headspin:  :wassup:

your gay Jerro, just admit it.

Daniel and myslef will be up there June or July.

  • 3 weeks later...

Does Trojan do rego inspections??

I need HEAPS of work done...When I get the car back from the Smashies, I need to get Rear brakes, Service, Box Oil, New Pod Filter, New GT Intercooler supplied and fitted....Bit of things t o do...

I also *may* need to borrow a M-Spec front bar or something...I have a Trust Copy at the moment, and its waaay too low.

Does Trojan do rego inspections??

I need HEAPS of work done...When I get the car back from the Smashies, I need to get Rear brakes, Service, Box Oil, New Pod Filter, New GT Intercooler supplied and fitted....Bit of things t o do...

I also *may* need to borrow a M-Spec front bar or something...I have a Trust Copy at the moment, and its waaay too low.

no but the shop next door to them do, B & E auto motive. So if you get trojan to get it rego inspected next door will do it

My GTR is in with John and John @ Trojan at the moment.. Finally getting my clutch done(having all that power and not being able to use is very frustrating)

They seem like very nice and know what they're on about, very well priced and they know the guy that I bought the GTR off.....

Only bad thing is that it took me ages to find the place, very well tucked away and no signage..

Hopefully the new clutch will arrive today and I'll get my baby back tomorrow :-)

I'm pretty sure thats the way they like it... lol. I was lucky enough to run into some bloke with a Red R32 GTR with a carbon fibre bonet and rays wheels (lol, we all know who i'm talking about) who pointed me in the right direction.

My GTR is in with John and John @ Trojan at the moment.. Finally getting my clutch done(having all that power and not being able to use is very frustrating)

They seem like very nice and know what they're on about, very well priced and they know the guy that I bought the GTR off.....

Only bad thing is that it took me ages to find the place, very well tucked away and no signage..

Hopefully the new clutch will arrive today and I'll get my baby back tomorrow :-)

Yay, I got back baby back yesterday, new clutch in and driving fabulously!!

It took so long 'cause the courier lost my clutch, so instead of 1-2days for delivery it turned out to be about 4-5days :-(

But I can't give more praise for John at Trojan Motorsports in Mitchell, I'd recommend them anyday. He kept me up to date with everything that was going on and was very well priced, actually even cheaper than what he originally quoted me.

Anyone go to Premier Automotive in Mitchell? I wanna know what people think of em.

Also, does this Ed guy at Integra Automotive do engine conversions? I might go there and get them to quote me on dropping an RB25det into my VL. Hopefully he works saturdays? Anyways, when I go, should I say that one of you sent me?

Thanks,

Daniel

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...