Jump to content
SAU Community

Recommended Posts

For every ones info. I replaced the V Spec II sticker on my car, with a genuine Nissan sticker. It was super expensive, but aside from that, the sticker is shaped to match the corner of the back boot like a template. This means that you can use the corners and edges of the boots to get the sticker in the exact factory position. Pretty sweet. I was surprised.

Just checked my spare sticker (my original is just showing a tiny amount of peel on one corner....) - you are right - how clever of them......

Cheers

The Baron

PS That Edward Lee Video should be pinned somewhere as a "must see" for anyone who ever considers buying a car from that guy, with annotations about all the misleading statements.......

Good luck this weekend Bob! :D At the very least I'm sure you will have fun!

Yep had fun but my times were ..........OK????????

My best 1/4 mile was 13.399 (slip attached) but my best terminal speed was 178.94 kph a couple of runs later (111mph).

With that speed I should have been well into the 12's but my 0-30' times are horrible.

I just can get it off the line. I tried it in 2WD mode by pulling the fuse but that was worse!!!!!!

I just sat there and smoked the tyres. :closedeyes::closedeyes::closedeyes::closedeyes::closedeyes:

Anyway, I flogged a few of my mates in stock HSV's and GT Falcons (mid to low 14"s)!

Cheers,

Bob.

post-78207-0-53167100-1403937609_thumb.jpg

Its all in tyre pressure Bob. Need to be 15psi from memory, can't remember exactly but it's a super low pressure.

Once that is set, 2nd gear burn out in rwd mode then flick to awd, on the limiter and release the clutch...when it hooks up you will be shocked what g's these cars can pull on take off.

Mine did a flat 13 when it was stock as a rock...won't get much better than that although I've heard they run a PB 12.8

Thanks Marko,

Modern Motor (April 1990 issue) ran a 13.1 stock........ That's the best I've seen in any publication. Most run around 13.7.

My tyres were set at 27psi for the fronts and 22 psi for the rears...... Guess I stuffed up on that one.

I normally run them at 34 and 30 on the road.

Was pleased with the terminal speed though.

Bob.

At 111mph it's not stock and probably making closer to 270kw at the wheels and should be doing flat 12s or even into the 11s

100% correct........ Unigroup dyno'd it at 271.6 rwkw.

Bob.

what is not stock on the car Bob?

Bar the exhaust, (3.5" front Pipe, 3" Hi Flow Cat, 3.25 Rear pipe, 3 and Hiflow rear muffler) everything you CAN'T see.......

  • Nistune
  • Sard 720cc injectors
  • Lager Walbro fuel pump
  • HKS Boost Controller
  • Splitfire coils
  • Excedy HD Clutch

Bob.

Bar the exhaust, (3.5" front Pipe, 3" Hi Flow Cat, 3.25 Rear pipe, 3 and Hiflow rear muffler) everything you CAN'T see.......

  • Nistune
  • Sard 720cc injectors
  • Lager Walbro fuel pump
  • HKS Boost Controller
  • Splitfire coils
  • Excedy HD Clutch
Bob.
nice. The Walbro pump is not to noisy?

nice. The Walbro pump is not to noisy?

No....... The exhaust must drone it out!

A mate of mine had a Brock Commodore VK Group A that was tricked up with a Walbro pump and that was horrendously noisy so I know what you mean.

Bob.

Yep had fun but my times were ..........OK????????

My best 1/4 mile was 13.399 (slip attached) but my best terminal speed was 178.94 kph a couple of runs later (111mph).

With that speed I should have been well into the 12's but my 0-30' times are horrible.

I just can get it off the line. I tried it in 2WD mode by pulling the fuse but that was worse!!!!!!

I just sat there and smoked the tyres. :closedeyes::closedeyes::closedeyes::closedeyes::closedeyes:

Anyway, I flogged a few of my mates in stock HSV's and GT Falcons (mid to low 14"s)!

Cheers,

Bob.

That's still very respectable, and at least you had fun... that's the main part!

How were you launching the car Bob? These things need a little tough love from the start line, you might feel bad in doing it but it's what she's made for :) There's absolutely more to be had from your car, your 60 foot time of 2.1s could come down to 1.6 to 1.8 seconds with a bit of practice - I'm not a drag racing expert by any stretch of the imagination but that little bit shaved off the front end often seems to translate to a larger amount shaved off at the other end.

Well done in any event, at least you came out the winner against the HSVs and FPVs! :)

  • 1 month later...

So just an update on my gtr,

Installed new timing belt, HKS cam gears, water pump etc,

Bought a power fc and some hks 550cc injectors.

I had a second hand apexi avcr so I just used the boost solenoid and wiring and converted it to my power fc.

Got the car back from the tuner today and made 265kw's on 1.1bar boost!

Pretty happy and the car feels a hell of alot more alive than before!

post-90998-0-26142400-1406888757_thumb.jpg

  • 3 weeks later...

Hey guys,

I've been off sau for a year or two. Sure we used to have another rare register with a good record of vpsecs and n1s? I'm probably just lost tho, lol.

Anyway adding for the community, in Brisbane with a 1994 Vspec II N1. Unfortunately not very standard! :-)

Cheers

Michael

Fortunately, Australia has acquired 2x BNR32 V-Spec II N1 in recent times.

Congratulations to you Michael as well.

We'd like to grab them before Canada's timeline permits...

Last six digits on mine are -311603

Terry-36_zpsc2e1370c.jpg

It's still awaiting compliance.

  • Like 2

Fortunately, Australia has acquired 2x BNR32 V-Spec II N1 in recent times.

Congratulations to you Michael as well.

We'd like to grab them before Canada's timeline permits...

Last six digits on mine are -311603

Terry-36_zpsc2e1370c.jpg

It's still awaiting compliance.

is that a genuine N1 Terry?

Car looks very nice.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I can ship Nismo floor mats to you: https://www.oemsoko.co.jp/products/nismo-floor-mats-for-skyline-r33-bcnr33-stagea-wgnc34?_pos=1&_sid=9278c1467&_ss=r  
    • Here's the link: https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6642/misc/G49?frame_no=WGNC34-137122 What you think about it? The same product i found on nengun: https://www.nengun.com/oem/parts/40567/MiPwn5qAMfCfmpxHNDnwn5q9MDAx8J-QiW9sZC1qcC0xMTAtRzQ5LS0wMDE/Floor+Carpet+%2F+Mat+2/0688339eba149c19 Bot i have spoken to 😅 ensured me, that mats are 100% original, oem product. I have my doubts. I also heard what you mentioned, that nengun often offers items that are actual not available... On the other hand mats i found on japanese yahoo or ebay are in poor condition and still quite expensive so i'd rather wait for some better offers. My location - Poland. We literaly don't have ANY market for used Stagea parts so need to search outside Europe.
    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
×
×
  • Create New...