Jump to content
SAU Community

Recommended Posts

Did a quick search on the forums but didnt find an answer. I know that if you import a car and you wish to drive it on the road it must be complied and registered etc

What if you import a car purely for track or parts and you do not wish to drive it on the road, does it need to be complied? Specifically in Perth (if that makes a different)

Thanks Guys

Mine isn't complied , as far as I am aware that is the whole point of importing race/rally use only vehicles . Being alot cheaper to buy for the Motorsport guys and saving the compliance head f**k for the importer .

Care to elaborate on that answer?

I think others have already done a good enough job of it. Track cars are imported for track use only. They only need to be complied if they're being registered for street use.

This thread got me off onto a tangent whereby this fellow in Wisconsin wasn't allowed to keep his '95 & '96 GT-Rs - even for use on a track.

So it ends up that Justin Beno of Wisconsin had to forfeit his restored GT-Rs only for the gov't too crush them and sell the scrap.

What a waste.

This thread got me off onto a tangent whereby this fellow in Wisconsin wasn't allowed to keep his '95 & '96 GT-Rs - even for use on a track.

So it ends up that Justin Beno of Wisconsin had to forfeit his restored GT-Rs only for the gov't too crush them and sell the scrap.

What a waste.

That sucks. Glad thats not how it is here, and hopefuly Aus wont follow suit

"After offering to pay the fines and help the authorities find buyers for both machines overseas, the prosecutor declined. Instead, both cars will be crushed and sold for scrap" thats ridiculous. I hate how some people have to go to the extreme and end up achieving no result whatsoever. Theres no reason why the cars MUST be crushed. Poor bloke, I'd be howling

"After offering to pay the fines and help the authorities find buyers for both machines overseas, the prosecutor declined. Instead, both cars will be crushed and sold for scrap" thats ridiculous. I hate how some people have to go to the extreme and end up achieving no result whatsoever. Theres no reason why the cars MUST be crushed. Poor bloke, I'd be howling

No time to offer his mother-in-law one final ride ;)

...at the crusher's

  • 2 weeks later...

This thread got me off onto a tangent whereby this fellow in Wisconsin wasn't allowed to keep his '95 & '96 GT-Rs - even for use on a track.

So it ends up that Justin Beno of Wisconsin had to forfeit his restored GT-Rs only for the gov't too crush them and sell the scrap.

What a waste.

I remember reading about this in the news. Such a waste

Oh no one of them is the skyline from the fast and furious movie :(

You would have required the talent from "Argo Fark Yourself" to get that car out of Wisconsin > Jay Leno's garage

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...