Jump to content
SAU Community

Recommended Posts

So I'm home after the big matsuri weekend.

It was all going great, not the greatest weather, especially on the Saturday, until I went out for my second round of runs on the Sunday and .... BANG....

Yep, blew third gear. Not the best result, but I had a feeling the gearbox was the next weak point. Changed the oil at the track and a LOT of metal came out. Seeing as I drove the car there (4.5hr drive) I had to decide weather or not to take the chance to try and limp home. I did, and it managed to without any dramas, however the box clearly still has some broken bits in it. Got some amusing looks rolling through towns with all the gearbox noise :P

Anyway, here is a video of an average run from the Saturday, I will sort through my videos from first session on the Sunday and see if there is anything worth putting up.

I thought 25 boxes were pretty strong bits of gear :)

That's what I keep getting told :P

I suspect that age was probably a factor, the car has 160,000kms on it now and as far as I know it was the original box.

Looking into the cost of a new box, not real keen on a second hand one. Also what's peoples opinions of getting it reco'd, and also options like straight cut gears? I don't know a great deal about gearboxes so any info would be appreciated :)

  • 2 weeks later...

Couple of photos that have popped up from the matsuri before 3rd blew.

2q2kcqs.jpg

2cf71u0.jpg

wk4kro.jpg

funrzr.jpg

Update into fixing the car: I have decided I will most likely buy a brand new gearbox from RHDJapan because it will be about $2200 delivered, cheapest new price I have found in Australia is $3100 delivered. I will be pulling my old gearbox out in a couple of weekends, was away last weekend, will be away this weekend, so hopefully the next lol. I will pull it apart and take pics to show everyone the damage. Once I have it out I will order the new one (also gives me a chance to pay shit off my credit card so that there is enough free on their to pay for the new box haha.

  • 2 weeks later...

Pulling gearbox out tomorrow. Will open it up for a look and post some photos.

I'm really struggling between buying a new box or saving a bit longer and upgrading gears, then I 'should never have to worry again'. Lol.

If anyone that has seriously looked at the options before could jump in and let me know any info would be greatly appreciated.

Well the gearbox was pulled out last Saturday as planned. I still have no fully opened it however, there seems to be limited info out there and I am just winging it. I am currently stuck at the selector. I have knocked the pin out but it appears to be a collar, I'm told the proper name is a 'roll pin' lol still holding it in so I've got to get a punch for that then hopefully I'll be on my way to opening it :P

Edited by timmy_89

Yep. I'm surprised I made it the 400km drive home haha. Every gear has marks on it though.
Simply because of current financials, I have ordered a brand new gearbox from RHDJapan. I wanted to buy local but the markup was about $1000 and those I spoke to wouldn't budge on price. It should be here in 2-3 weeks then I'll have to find time to fit it and get it all run in before some hill climbs events. I would have loved to have gone straight cut gears but again current financials just won't allow it and I'd prefer to get the car running again for now.

I would like to go PPG straight cut synchromesh gearset but I'm just too stuck for funds at the moment. I will run with the new box for a while and just see how it holds up for now. I know it won't be a problem with hill climbs etc which will be main focus over the next year. I hope to attend the November Wakefield matsuri again so I guess that will put it to the test and I will be 'trying' to be more sympathetic on the box after some advice from a view. If I brake a gear again I will not be wasting my time doing anything other than going stronger. We will just see how it plays out I guess :P

I would like to go PPG straight cut synchromesh gearset but I'm just too stuck for funds at the moment. I will run with the new box for a while and just see how it holds up for now. I know it won't be a problem with hill climbs etc which will be main focus over the next year. I hope to attend the November Wakefield matsuri again so I guess that will put it to the test and I will be 'trying' to be more sympathetic on the box after some advice from a view. If I brake a gear again I will not be wasting my time doing anything other than going stronger. We will just see how it plays out I guess :P

You will be right mate ;) Mine has held up for a fair while and my kms are about the same as yours was so a brand newy should last for ages!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...