Jump to content
SAU Community

Recommended Posts

Yea baby

3 x 20 minute session today at ec and oil only got to 115 degrees and water to 99

We're back baby

Only ran on the rsr,s and down to a 1:50. Rubber is well farked and the rear brakes went metal to metal

Also speed was up to 210 with the lower engine temps today

Trust ic pipes sorted the ic pipe issue out

  • 3 weeks later...
  • 2 weeks later...

new rear pads in

latest mod was two child restrains for the rear

also pulled the harness bar out and put in some parcel tray bolts in so i can run a harnes and fit the baby seat in

after driving it all weekend i cant wait for the q7 to come back from its service

noise, bumpy pos

  • 3 months later...

So I have been thrashing the shit out of this thing regularly and the f**ker just won't die

After the crash bang boom of shock works I changed to HSD and they we're heaps better

Decided to punt the HSD on feedback from a few Tarmac guys

And picked up a set of tein circuit master rs coils for it

They have been rebuilt to tarmack rally specs by race pace

Apparently they are the shit to have

And someone else has already done he hard work

imagejpg1_zpsc3deade4.jpg

I have some cool shit for this car that I have been collecting and I think next month is time for a proper update with more fasts

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...