Jump to content
SAU Community

Recommended Posts

couple of shots from Circuit Club:

1910002_441142296025444_9137792460351887

10384909_441141792692161_482144101492869

Went for a bit of a spin!

10524630_441141746025499_784410468464564

Had a blast and Dan came third overall for the day with a 1.08!

Best I managed was 1.12 so I definitely have a long way to go with my driving, but still a PB for me. And the D2's make a HUGE difference to my confidence, damn they pull up hard.

Anyway, the old girl is off for a few more changes, should be interesting when it comes back :yes:

  • Like 2

If you're running the D2 pads (I used to distribute them) you'll find they don't last a very long time. As dar as budget set-ups go I dont think they can be beaten. Best thing you can do to them is throw a set of Project Mu HC+ at them. We found them to work incredibly well with the D2 setup. You'll never look back.

I heading to wakefield tomorrow to wake my GTR up for the first time in a few years.

Last time I was there I ran a 1:12 and that was with about 260kw and 16x8" street rubber (old potenza GIII) and full trim with stock brakes, suspension and diffs. You definately have the potential to go faster :yes:

So Im hoping to quicken that time a little now with the extra work done.

Still has stock suspension and diffs, but better brakes, semis and a little more poke.

Should be interesting :D

Booked In to Sept track day yet!?!

Not yet! Need to see if the car will be running by then!

If you're running the D2 pads (I used to distribute them) you'll find they don't last a very long time. As dar as budget set-ups go I dont think they can be beaten. Best thing you can do to them is throw a set of Project Mu HC+ at them. We found them to work incredibly well with the D2 setup. You'll never look back.

The kit came with street pads which got promptly thrown in the bin. We ran Winmax W5 pads which were f**ken awesome for the money. Highly recommended.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...