Jump to content
SAU Community

Recommended Posts

Started filling all the 10mm hole that were drilled from when the dealer had it rust treated back when it was new.

They weren't scared to drill random holes everywhere to spray the rust treatment in.

IMGP3048_resize_zpsuzecgd7p.jpg

It's nice when you find bog inside the car and a random hole. This quarter panel on the passengers side did have 16mm of bog in it

so I guess they started levering the quarter out from the inside.

IMGP3044_resize_zpsqdenqyju.jpg

Some of the other old repairs, looks like they cut patches out from inside the car to hammer the sill panel out.

IMGP3047_resize_zpsnmjw2bkm.jpg

IMGP3046_resize_zpsdpdj1cjp.jpg

  • Like 1
  • 3 weeks later...

Bit more done, started the brake lines and fuel lines.

IMGP3053_resize_zps6bfjhpql.jpg

IMGP3058_resize_zpse3rwhrcq.jpg

Got sick of using a cheap brake line flaring tool so lashed out and brought a sykes pickavant flaring tool but my super dodgy tube

straightener make from roller door wheels still works ok.

IMGP3051_resize_zps4wjty5cc.jpg

IMGP3052_resize_zpstjzuzxhu.jpg

  • Like 4
  • 3 weeks later...
  • 2 weeks later...

Started wiring the body harness, had to sort through and cut up some spare wiring looms to make one good one up.

Looking at buying the Link G4+ thunder ECU, seems to have everything I will need and more. http://www.linkecu.com/G4PlusThunder

IMGP3077_resize_zpsxrpzyuma.jpg

IMGP3078_resize_zpseizwfhwj.jpg

  • Like 1
  • 3 weeks later...
  • 5 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
    • Sounds good, we will aim to be there! @The Bogan I'll give you a shout if you are heading up to campbelltown for the meet too.
    • Before I get to the test day, just to finish off the android head unit. This is a demo from car start up....the standard/host system takes a few seconds to boot (same as all v37) but Android comes up quickly. In this vid I'm using the delivered launcher but have set the default to Agami since which is easier to navigate when if use primarily 5 apps. You can see the host system still takes over when required eg putting it in reverse, and you can switch between Android and not by holding the back button 3 sec. It is pretty responsive (fast) but you can see I had to press harder than expected a couple of times.  I still have the phone connected to the stock system, and that also seamlessly takes over Android music playing. v37-android-demo.mp4 The bigger reason that I put this in though is so that I can use Ecutek directly on the head unit. That gives me a dash with logging (up to 20MB only), high and low value warnings on any parameter etc etc. I've run a USB cable from the Ecutek OBD dongle to a USB input on the unit, easy. v37-ecutek-demo.mp4   The unit did freeze on the launcher the other day, I think Agami was trying to verify the license when it didn't have a data connection...will monitor and report back if there are any other problems but so far I'm very happy with the upgrade.
    • Nah that is just crappy GPS mapping, I did have a small excursion (cold tyres, damp track, surprise!), will post up that when I get a chance.
×
×
  • Create New...