Jump to content
SAU Community

Recommended Posts

Lose the idea of an internal oil pump. Go straight for an external single stage belt driven pump, combined with an accusump and a good gated enlarged sump will sort out your oil system. That is probably the most critical part of your build for the abuse it will see on the track.

A good crank trigger system for timing accuracy.

Pretty well everything Justin mentioned. I use a Toyota mr2 spyder electric hydraulic power steering pump and it works perfectly. Boot mounted with pressure line and return line run up to the rack. Removing all the ancillaries from the block really gives you more room in the engine bay.

Obviously run E85 or a similar alcohol fuel, helps with power production and temps. With that benefit run a heat exchanger in your radiator and the oil and water temps will be kept pretty well in sync.

Or you could get ridiculous and get the RB26 crank and put it into an RB30 block and get some custom 132.8mm rods made up to generate a stock stroke RB26 with a 1.8:1 rod/stroke ratio to take the edge off some of the loads and maybe reduce piston acceleration at TDC a bit - little things that can potentially help make a revvy engine reliable and efficient. As it stands stock stroke RB30s have a better rod/stroke ratio for higher rpm etc than an RB26, but higher average piston speeds due to the stroke length - getting a more agro r/s ratio using the RB26 crank in an RB30 but keeping the same avg piston speed could potentially put valuable movements towards making an effective revvy RB.

like the way you're thinking mate!

If you'd like a light revvy feeling (like a 20 is) engine, just loose all the weight off the engine... Have a good hard look at an electric water pump! especially if you're going to run it in a drift car.

Power steering... again, it's a pretty big strain on the engine. As long as you have a good size battery, an electrically driven ps pump can be more (much more) powerful than an under driven mech pump. Especially with a few tricks. Again- bonus in a drift car!

Hell- if it's a track only car, mount the alternator to the drive shaft (like a proper race car).

... as you said, have a good hard think outside the box.

\Cheers

Justin

cheers mate, definitely looking into electric water pump, probably a good idea to look into electric powersteering pumps as well.

Ross trigger and balancer setup is about 2K, give or take.

the setup we are looking at is a little bit custom, which we are hoping to take the cost down a fair way, but still not going to be cheap that's for sure.

Lose the idea of an internal oil pump. Go straight for an external single stage belt driven pump, combined with an accusump and a good gated enlarged sump will sort out your oil system. That is probably the most critical part of your build for the abuse it will see on the track.

A good crank trigger system for timing accuracy.

Pretty well everything Justin mentioned. I use a Toyota mr2 spyder electric hydraulic power steering pump and it works perfectly. Boot mounted with pressure line and return line run up to the rack. Removing all the ancillaries from the block really gives you more room in the engine bay.

Obviously run E85 or a similar alcohol fuel, helps with power production and temps. With that benefit run a heat exchanger in your radiator and the oil and water temps will be kept pretty well in sync.

still looking into external oil pump, just finding it hard to justify the extra $$ over the nitto internal jobby when we are fairly sure the nitto will be up to the job, any more insight into this as i'm really basing that on what i've been told, not my personal opinion.

thanks for the tip on the mr2 pump! sounds good. will be running united E85 which seems to be the most consistent, not really moving from around 75-80% ethanol.

nitto or any OEM style oil pump isnt bullet proof.. where as external pretty much is bullet proof

True, but don't bash the limiter like a retarded clown and you shouldn't have a problem. It really isn't that hard...

Why the hell would stuff around with a custom trigger setup when Ross has done all the R&D on a great bolt on kit. $2k is nothing for a kit like that.

I and a few other guys also run external oil pumps, not one issue with any of them. Stable oil pressure all the way up to 10,500rpm.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm so far behind in the jobs I have to do at both work and home (including car) that I have become immortal. There's simply no way that I can die now.
    • Each to their own I guess  Me, I put just as much time into cleaning inside of the cars as I do on the outside As for getting wet, it is really no different than steam cleaning the carpets at home, apart from the cars carpet dries alot faster than the house, again, I only do it in the hotter months and leave the car opened up for a few hours As I only do it yearly, it is just before I do the diff and gearbox service, so I clean the carpets, then it's up on stands, wheels off, service, clean the undercarriage,  grease the bushings and do a nut and bolt check on everything  Disclaimer: I typically had all the time in the world to kill when I was working 🤣, so spending a full day or 2 cleaning, serving and "looking at stuff" was,  easily achievable, and a fun mental therapy day As for time to kill, I retired last Wednesday, so apart from my physical training, my days are filled with lots of random jobs around the house and garden...."Idle hands are the Devils something something" I am also buying a new house sooner rather than later, I'm actually looking at a potential property tomorrow, I'm looking forward to getting a car hoist as I'm starting to get to old to crawl around under a car, I can only imagine all the undercarriage cleaning and looking at stuff when that gets set up
    • Yeah, I'm not interested in wetting the carpets, and I don't care about brown dirt/dust that lives deep in the pile or underneath. It's not like I crawl around on them in my birthday suit or eat dropped food off them (because there is never any open food in my car). The seats are alcantara (cheap Chinese imitation alcantara, to be sure!) with barely 1" of foam pad behind the surface. That's not getting wet either. Any car that I would be happy to get the interior wet, I would not care to put the effort into.
    • We have one that holds 2.8L of water. On floor carpet that hasn't been touched in 2 or 3 years, will take a minimum of 2 fills of the tank to do a bedroom, and that's going AROUND the bed.   In the cruiser, I used an ENTIRE 2.8L tank, just on the front passenger footwell. But it had some fungus growing, and had been full of mud from being used as a 4WD for many years. I can do that floor again, and it will still pull mud out. However, the water now only looks dirty, not pitch black and leaving full sludge in the bottom of the tank it sucks back into. Oh, and, this is about a $1500 unit.
    • This is mine, works a treat for the cars, suction is good, I use the Bissell clean and protect stuff I have found giving it a good spray and light scrub with the soft brush on the head of the nossle for carpet, and a rub with a microfibre for cloth seats and cloth door trims, prior to another quick spray before vacuuming it up works the best @GTSBoy You would surprised on what it gets out of carpet and seats that actually "look" clean, I recommend that you test drive yours when you have a little time to kill, then post pics of the muddy looking water that I believe you will find
×
×
  • Create New...