Jump to content
SAU Community

Recommended Posts

Just to chime in..

The Car's KM's are definitely taken down when de-registered.

Every Customer's cert I have seen as a deregistration odo-check done ; a month before the Planned Date of Export on the Certificate.

Of course no one would ever dream of rewinding the odometer to match the kms at the last shaken, prior to dereg....

These certificates should not be relied upon as the bible, as essentially your buying a used vehicle from another country.

They should merely be a gauge to identify if there has been significant windback.

Of course, the critics would argue that I drove my GT-R and wound it back.

And there is nothing to say that might not be a case.

Remember, you are buying a Used Vehicle ; there is always a risk being taken in your purchase.

These certificates should not be relied upon as the bible, as essentially your buying a used vehicle from another country.

They should merely be a gauge to identify if there has been significant windback.

Of course, the critics would argue that I drove my GT-R and wound it back.

And there is nothing to say that might not be a case.

Remember, you are buying a Used Vehicle ; there is always a risk being taken in your purchase.

This is true ... until they use it as a selling tool. Buy this "Low" Km version of such car.

Yes definitely this is not the be all and end all when it comes to car inspection but it will add to the car.

I'd rather buy a 15 year old car with 200,000 on the odo than 100,000...

That said, ignore the mileage...get the engine tested and check the rest of the car for wear. Jap cars on the whole are quite reliable; if these things check out okay then they will usually last you a very long time.

  • Like 1

As an import broker, I completely agree with you mate. When looking at cars over 10 years old, the reading on the odometer is really the last thing I consider. However I can tell you that the vast majority of people we source cars for are hugely caught up on the kms showing on the dash. And even absolute dungers going through auction will fetch big dollars often purely on the basis of those kms.


My old white R34 GT-R was a perfect example. People turned their noses up at it because it had 112000kms on it. Yet it was one of the cleanest, straightest examples I've seen. Inside and out. The engine was strong and healthy, the gearbox was the tightest, nicest getrag I'd driven.

The problem is there are also punters who will turn a blind eye to it, even though they know the odometer has been hit.

Just as an aside, why aren't dealers compelled to list VINs in their ads in the same way private advertisers are?? I've only just noticed this.

As an import broker, I completely agree with you mate. When looking at cars over 10 years old, the reading on the odometer is really the last thing I consider. However I can tell you that the vast majority of people we source cars for are hugely caught up on the kms showing on the dash. And even absolute dungers going through auction will fetch big dollars often purely on the basis of those kms.

My old white R34 GT-R was a perfect example. People turned their noses up at it because it had 112000kms on it. Yet it was one of the cleanest, straightest examples I've seen. Inside and out. The engine was strong and healthy, the gearbox was the tightest, nicest getrag I'd driven.

This exactly! Hit the nail on the head for me. You can find much cleaner cars with more kms on them then others. It comes down to the individual car and how it is. Hence selling/buying a car based purely on the odo reading is not going to get you the best car for the money. And this point can definitely be seen within our community :)

"better sell my '69 911 with 54,000kms on odo before ppl suspect..."

I mean, does odo tampering happen with other brand cars? I presume so; but not to this extent?

  • 3 weeks later...

I work at Bespoke, (formally known as Import Factory, name changed due to Euro and local cars)

This was a mistake made by the salesman who put up the ad, as we have another one in Japan that is red also and only has 95000kms on it, he mixed it up. We offer ORIGIONAL Deregistration certs. and auction reports on all Imported Vehicles, so why would we do something like this. The mistake was fixed in minutes once we were notified!!

We offer a service to check your KMS, http://www.bespokeinc.com.au/index.php/tools/odometerhistory

why would we do this? And how could we fix this straight away if the speedo had been tampered with? (the ad was updated with a pic of the auction report and a pic of the dash displaying KMS)

Maybe it was a genuine mistake? Seems pretty stupid that a company would go to such extreme lengths to give themselves a good name and then do something like this. Either way well spotted.

This Is Our New car coming in soon. The Red Tommi Mak with 95,000kms.

1336auctionreport.jpg

This is the car which our other Red Evo was confused with.

Whenever we advertise a car we try to put VIN numbers because we have nothing to hide.

We guarantee our kilometers with all our imports unless they have been traded in by a customer.

We don't hold any consignment stock, so you'll never get an excuse "We didn't know, It wasn't out car"

All dealers claiming that the Japanese dealers / suppliers wind back kms are liars!

In my experience (since 1999) the Japanese don't like doing this and only do it when requested by Australian dealers.

As you can see on the report we purchase our vehicles from a reputable supplier who has been in the industry for more than 20 years. (Hiewa AUto)

They will not under any circumstances tamper with speedo's!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That's probably OK. That's a face to face compression joint between two surfaces with the clamping load provided by those bolts. So.... it's unlikely that the bolts will end up feeling that load in shear, unless the clamping surfaces are not large enough, bolts not got enough tension on them, etc etc to prevent the two faces from moving wrt each other. Which... I would hope the designers have considered, seeing as it's probably one of the most important things the upright has to do apart from resist collapsing in its own right. But yes, it would definitely be worth asking them what their safety factor on that part of the design was. I tend to think that the casting, being a casting, is not necessarily the strongest bit of material in the world. It's about an inch square, and when you think about the loads that are being put into it, you have to wonder what safety factor the Nissan boys (and every other OEM engineer who has designed all the millions of other uprights that look essentially the same) used to account for defective casting, aging, severe impacts on the wheel, etc etc. 
    • Those bolts would be orders of magnitude stronger that cast aluminium though.  And its mainly clamping force, not shear they are dealing with?
    • Except all that twisting force that is breaking a cast piece, appears to be going through 4 bolts in the picture Johnny posted of the BryPar one...
    • The smart approach is to use the gearbox loom from the manual car. Makes it a lot easier - just plugs into the switches on the box and plugs into the main loom up near the fusebox. Then you only need to deal with bypassing the inhibit switch. The other approach requires you to use the wiring diagram to identify those wires by colour and location, perhaps even indulging in a little multimeter action to trace them end to end to make sure, and then.... you will have the answers you need. The R34 wiring diagram is available on-line (no, I do not have a link to it myself - I would have to do a search if I wasn't able to go to the copy I have at home).
    • Hi, i’m converted my r34 4dr auto to manual but need help with gearbox wiring. There are bunch of wires no idea which one for speedo drive, neutral, reverse can anyone help me. IMG_6860.mov
×
×
  • Create New...