Jump to content
SAU Community

Recommended Posts

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

Hate to be a party pooper, but has anyone bothered to consult the club's constitution.

According to that doco, particularly Rule 8, elections are held at the AGM (ANNUAL General Meeting), while this thread is proposing an EGM (EXTRAORDINARY General Meeting).

Also, Rule 8 specifies nominations be with the secretary at least 21 days prior to the meeting, duly seconded and agreed to by the nominee.

Hate to be a party pooper, but has anyone bothered to consult the club's constitution.

According to that doco, particularly Rule 8, elections are held at the AGM (ANNUAL General Meeting), while this thread is proposing an EGM (EXTRAORDINARY General Meeting).

Also, Rule 8 specifies nominations be with the secretary at least 21 days prior to the meeting, duly seconded and agreed to by the nominee.

Better cancel our banners and replace the E with an A

Perhaps nominate yourself onto the committee so such important matters are no longer overseen in the future

Hate to be a party pooper, but has anyone bothered to consult the club's constitution.

According to that doco, particularly Rule 8, elections are held at the AGM (ANNUAL General Meeting), while this thread is proposing an EGM (EXTRAORDINARY General Meeting).

Also, Rule 8 specifies nominations be with the secretary at least 21 days prior to the meeting, duly seconded and agreed to by the nominee.

Looks like someone just got confused between E and A, no big deal.

Nominations posted here, are a written form if I am not mistaken... So that is covered for some. Some have also not accepted but 8.1 says that if there are none it can just be sorted out at the meeting, nice and easy.

Doesn't really seem like a big issue.

I will be there, miniwog and acsplit i believe will be attending also talking to them yesterday/today.

We might not get there in time tonight but was wondering if someone could put up their hand for me and my partner Robyn (who is also a member of SAU vic) for the General Committee. We hope to get there but if we don't it would still be great to get involved, hope there is someone who can do this for us and thanks in advance to who does :)

We might not get there in time tonight but was wondering if someone could put up their hand for me and my partner Robyn (who is also a member of SAU vic) for the General Committee. We hope to get there but if we don't it would still be great to get involved, hope there is someone who can do this for us and thanks in advance to who does :)

so just the executive committee are voted in tonight.

then they select the general Committee from people who show interest.

so you will be fine.

M

Thanks to those who found the time to make it last night.

Discussion was thick and we will have updates for everyone in the coming weeks.

I can announce that

Richo president
Dan Vice President
Anna Secretary
Tony Treasurer
  • 2 weeks later...
Richo - President

Dan - Vice President

Anna - Secretary

Tony - Treasurer


Aaron - Events

Oscar - Events


Simon - Web


Laith - Media


Leon - DECA

Matt - DECA

Ryan - DECA


Dave - Motorsport

Andrew - Motorsport


Martin - General

Bec - General



Summary

- Dave will take on updating the MS Championship results

- We are to make an effort to approach Broadford to secure a date for a motorsport event in 2014 and 2-3 motorsport events in 2015.

- If Broadford does't result in anything, approach Haunted Hills for a motorsport event in 2014 and 2-3 events in 2015.

- The new operators at DECA have drastically altered our long standing arrangement, as a direct result the cost of hiring and running the venue for the club has increase significantly. We have had to pass this onto competitors. Continue to monitor the state of the facility, while we are in a bind at the moment as there are no similar facilities available options may open up eg.

1. Winton skid pan (new, unknown costs, smaller than DECA, rough surface)

2. Lake Mountain large private car parks

3. Haunted Hills ATC type setup

- SAU VIC members price for DECA, club to take on the difference

- We will have a club garage at track days where possible or a marque

- Organise a gokart day

- Organise the renewal day out at MiColour
Not even picked for general, must not have shown enough want I guess, maybe next year :(

We would still love any help you have to offer. There's plenty of behind the scenes helpers not listed here :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...