Jump to content
SAU Community

Recommended Posts

Its too effn loud that it gave me a headache coming back from the exhaust shop. A xforce cannon with a 3 inch internal diameter. He said it would be louder than my previous jansai one but i didnt think it was gonna be this loud! The r32 even has a cat convertor and another resonator before the cannon and its doing my head in! what a waste of money!! do not buy these cannons for your own sake and everybody elses

Agreed, the bigger the muffler body, the better the sound absorption. Should have gone for an oval Xforce or Varex at a minimum. Resonators do fark all from my experience, mid mufflers are required, and the 4 inch thick Magnaflow offset muffler fits in there nicely with plenty of clearance.

The Japs are pretty good with their exhaust design, and if you find the right system such as the Fujitsubo Jasma exhaust, it will flow well and possibly pass a noise test. You need to watch for restriction pipes in the rear muffler on some systems as it's cheaper than simply designing a good muffler.

I've heard of many an X-Force muffler developing irritating frequencies that become unbearable > even headaches.

I once put an oval one with twin tips on my BMW 328ci - bad move! The drone was worst at Motorway speed - 110km/hr

  • Like 1

You actually think there is any difference between an Xforce and Magnaflow muffler (or most other brands) internally Terry? No point blaming the brand imo, just the design and size.

An offset muffler is going to do a better job of dropping decibels than a straight through.

I like my twin tips,nice and quiet putting around town but when you open her up on the freeway a lovely angry roar. :-)

You too Huh? I took my Blitz Nur canon off and put a 3" Magnaflow Straight thru muffler with a twin tip on.

Love it. (too old for Canons)

Droneless but nasty at WOT. :woot:

  • Like 1

you think skyline cannons are noisy and drony?

i just bought a forrester turbo (cheap) and its got a cannon on it, sounds like a wet fart through a megaphone in an amphitheater. its a horrible noise.

needless to say as soon as the budget allows it'll be getting a far quieter system

  • Like 1

You too Huh? I took my Blitz Nur canon off and put a 3" Magnaflow Straight thru muffler with a twin tip on.

Love it. (too old for Canons)

Droneless but nasty at WOT. :woot:

It certainly is olly,had a custom exhaust and the three inch tips made ten years ago, sounds fantastic and looks factory. :-)

Also, if your car is a natro then yes it will be loud with a 3" cannon. In fact it will be loud with any 3" muffler. Go back to a smaller muffler (or complete system if you went 3" all the way) and it will be much quieter

Jap exhausts dangle too low its another reason for locally made, I have no probs with scraping over bumps and besides skylines come with twin tips from the factory, good enough for me to steer cleer of Milo tins. Never had a defect in my twelve years of skyline love. :-) :-) :-)

Pfft well woopty do its not all about brands but what it looks and sounds like, plus I happen to know a major police factor is a Milo can tip, have been told so by hwp at many rbt stations,I drive thirty thousand plus a year for work from qld to Tassie no defects,keep it sneaky is my motto. :-)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...