Jump to content
SAU Community

Recommended Posts

You can get an e39 m5 for around 50k

Would be my pick. But 11-12 year old now

As Drew recommends, we've been tempted now and again to switch across to the E39 M5.

It needs to be low Kms to feel sure that you can sell it easily later on, as you Bobby concur.

P1050315_zpse8da09d1.jpg

We bought this 530i Individual (2003 model) for $28K back in 2009 with only 48,000Km.

It's now done 79,000Km for an 11 yr old car. We decided to keep it for a while yet.

You're welcome to test drive her (without being considered a tyrekicker).

looking at the inevitable time-consuming/expenses regarding Direct Injection, it really narrows your choice down (or at least defines what year/model you get). Lot of unhappy chappys with RS4's and mercedes.

personally... I'd get a pulsar :P

-1 to MPS. Cobb tune and exhaust will push 160fwkws. they claim 190 at the flywheel from factory...

but would do some reading up on the newer volvos.

http://www.carsales.com.au/dealer/details/Volvo-S60-2011/AGC-AD-15268958/?Cr=0&sdmvc=1

wont need diff due to AWD, but exhaust and flash tune would make more exciting.

Tez, back off, the N1 is mine.

Bobby, get some Audi love on man, they are great cars and the S4's are big value for money, stick a set of pipes on and pull chicks.

  • Like 1

Thanks guys, appreciate all the help.

Not sure a Focus is for me. Great cars, but maybe a little more for someone in their mid to late 20's. Just my view.

Was after something a little more luxuirous, hence the V36.

Go test drive one and I'm fairly certain you'll change your tune.

Put a fully specc'ed (and for $50 you can tick every box) Focus ST against any 10+ year old Beemer or Audi, and the Focus will kick the shit out of it in every way.

Go test drive one and I'm fairly certain you'll change your tune.

Put a fully specc'ed (and for $50 you can tick every box) Focus ST against any 10+ year old Beemer or Audi, and the Focus will kick the shit out of it in every way.

Hate to say that I reckon the ST was quicker in the twisties than my modded R32 GTR. It has more useable power down low due to being lighter. It surprised the hell outta me, being a RWD 6 cyl traditionalist.
  • Like 1

I'll throw in another vote for the IS-F. I've seen 2008 models for less than $60K with less than 50000kms . Insurance is also pretty reasonable when compared to the Euros, roughly 20% cheaper for me. The MY10s are the ones to get as they have the proper LSD but they're still around the $70K mark.

S5s are going for $10-15K more for similar age/ks, definitely a stunning car but well short of the 400hp of an IS-F.

From what I've read IS-Fs have very few issues (the odd rattle mainly) where as most of the Euros I'd be reluctant to pick up unless it came with extended factory warranty.

The S5, 135i & 370Z would be my also rans.

then just put a Chevy badge on. instant reliability

I reckon a TRD sticker across the back window would make it more reliable AND better on fuel.

Is the Golf R going to be sold in Australia? It might sneak in under $50K new, and as long as you sell it before the warranty runs out you should be fine. 296hp, 4WD, 0-100 in 5.1, 4-door hatch.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
×
×
  • Create New...