Jump to content
SAU Community

Recommended Posts

Do FP do a bolt on for the RB26 based setups ? If so then that would be the way to go for sure but as far as I was aware only OD did a 68HTA bolt on, another reason I started this thread was to get this sort of info

I would expect a lot more then 20-30hp going from a 60mm GT wheels to the 68HTAs, granted it will spool slower but that's a trade off you have to have when going bigger wheels to make extra power :(

The 68HTA is probably not ideal for a 2.6 but 2.8 or like me a 3.0 they would be quiet nice, especially as a bolt on upgrade

OD buy their turbos from FP.. so from my understanding they are the same. And your right, the stroker engine can take the bigger wheels just fine. but on my RB26, its not ideal if i want to give any spool form my actual setup -5 ( i sometimes miss the response of the my gt-ss lol). I gotta look more into those 2 differents compressor wheels from turbo direct and kinuwaga. at 60mm, they could maybe match closely the performance of the gtx2860

Basicly both option I showed feature a 'drop-in'' billet wheel. Difference being one is from kinuwaga and one from turbodirect ( My gut feeling tells me I have more trust in turbodirect a direct dealer of garrett than a chinese knock-off)

kinugawa is actually Japanese, I've seen a lot of their 3582 wheels used in the xr6t turbochargers with some fantastic results.

You basically end up with a turbo that makes the power of an f6 turbo and responds like an xr6 turbo

Oh thanks, I will look into it. Turbodirect returned my PM and said it was 1250$us for the wheel fitted to a brand new gt2860. Not a bad considering the labour needed to fit the Kando wheels will most likely be around 200$ too.

Another option... Anyone heard of COMP turbos and their triplex ball bearing ? They ask 1200$ per turbo.

http://compturbo.com/products/turbos/ct2turbo/billet/ct2-4747

Here's their reply when asked for a gt2860 replacement :

Option 1
CT2 Billet 47/60 / Turbine wheel 53.90 choice of .64 or .86 Turbine housing
-Triple ceramic ball bearing
-15% More air flow due to billet
-fully rebuild able and upgradeable
--Lightweight turbine wheel
-1 year warranty
Price: 1199.00
Option 2
CT2 51/68 Turbine wheel 53.90 choice of .64 or .86 Turbine housing
-Triple ceramic ball bearing
-fully rebuild able and upgradeable
-Lightweight turbine wheel
-1 year warranty
Price: 1199.00

hank you for inquiry on our turbochargers. We do offer a Direct replacement for a GT2860 We offer it in both 360 Thrust bearing or our triplex ceramic ball bearing option.
Compressor wheel we offer both billet and cast.
All of our gt28 direct replacement are offered with lightweight turbine wheel to reduce turbo lag.

I have in my head they have a poor reliability record, though I could be wrong or that could be out of date info - look into it at least

Possible,, i found very little info about these.. at least, mounted on RBs.

I'm REALLY leaning toward the turbos direct billet upgrade.

On different setups, I ran the GTX2860's with the stock anti surge front housings with welded on flanges in my 2.8. In short they come on boost later than a 2860-5. They are quieter though.

I switched to 2860-5's with brass bearing cages made and fitted by me :)

I like the 'feeling' -5's better, but the GTX series has silicone nitride bearings (stops metal depositing and galling) and metal cages plus the billet wheel (that is great for running over 27psi...E85)

Apparently the 'racepace special' is pretty good, they get a 2860-9 turbo and fit a -5 exhaust housing for less restriction in the higher boost/rpm ranges without sacrificing too much down low.

Wish I had a chance to do this when I had my -9's...

On different setups, I ran the GTX2860's with the stock anti surge front housings with welded on flanges in my 2.8. In short they come on boost later than a 2860-5. They are quieter though.

I switched to 2860-5's with brass bearing cages made and fitted by me :)

I like the 'feeling' -5's better, but the GTX series has silicone nitride bearings (stops metal depositing and galling) and metal cages plus the billet wheel (that is great for running over 27psi...E85)

I'm suprised by this result sean. say, the response is the same but power top end slightly improved would make sens but the fact that the gtx was slower to spool. do you have a clue as to why is that ??

On a RB28, someone posted here his midrange improved by close to 100whp and spool was pretty much the same, if im not mistaken.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...