Jump to content
SAU Community

Blocked Bov And Still 'whooshing' Through Pod Filter

schnorky

By schnorky,
in Engines & Forced Induction

 Share

Recommended Posts

schnorky Proficient

schnorky

Posted
Posted

Today I decided to swap my standard bov on my r33 to a greddy type s and found a dilemma..

The greddy type s is ment to have a loud laser sound that was achieved on my other turbo cars (r32,33x2)

The laser sound was a bit quiet and could still hear the "woosh" that the standard bov made out of the pod even though it's Not re-circulated back the the turbo intake..

So I decided to block the bov outlet with my hand, expecting to here compresser surge (fluttering) but to my shock could still hear the woosh out of the pod filter.

I scoped out the intake pipe and looks all good..

Why is it doing this ??!

schnorky Proficient

schnorky

Posted
  • Author
Posted

Doesn't feel dead or on it's way out?

Minimal shaft play running stock boost, no smoke or oil burning.

just wanting something different.. driving the car 2 hours a day the same sounds gets boring lol

Also running map sensor (microtech ecu) so doesn't stall like the guys running afms

Ben C34 Grand Master

Ben C34

Posted
Posted

Ok . Glad to hear it's a map ecu so you can play bov sound effect game without starting the next "car stalling or bogging down" thread!

Definitely seems odd the noise you are getting.... not sure what's going on there.

scotty nm35 Grand Master

scotty nm35

Posted
Posted

A duck whistle should fix that, just glue it in place of the 'LASER'

I always wanted to know how a whoopie cushion would go if you chopped it up a little and plump it back under the passenger seat...

  • Like 1
Badgaz Experienced

Badgaz

Posted
Posted

I bought a greddy type rs bov and had troubles with it. i found that the diaphram assembly had creased in assembly and would open but no close properly...you need to tighten up the spring pressure quite a lot and check the bov to make sure the diaphram isn't getting trapped. i soaked mine for a while in olive oil to get the diaphram working again.

the wooshing sound was the bov actually leaking in my case....do you get any boost pressure when you hear the wooshing ?

Piggaz Grand Master

Piggaz

Posted
Posted

Today I decided to swap my standard bov on my r33 to a greddy type s and found a dilemma..

Sooooo put the one that works back on. The stock one had been doing a great job for the last 20 years, why change it?
  • 1 month later...
schnorky Proficient

schnorky

Posted
  • Author
Posted

Found the problem...

Finally got around to pulling the bumper and cooler off to find out there was a huge split in the standard cooler piping, right underneath the pod filter hence why the sound was coming from the pod even though I blocked the bov.

Now time for some boost ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Slight brake pedal stutter after new pads

      By MBS206 · Posted

      Sounds more like what Brad said, that it's mainly transfer. What pad bed in procedure did you use, and did you replace/machine the rotors, or just swap pads?
    • PranK
      Slight brake pedal stutter after new pads

      By PranK · Posted

      The stutter is almost entirely in the pedal. I don't feel the brakes release and reapply as you would with ABS engaging but the pedal feels that way, without the brakes releasing. It only lasts for less than a second and the pedal is fine again. It's hard to explain, sorry.  I'll get under this weekend and just double check everything is tight. Fluid is at max where I left it.
    • MBS206
      Slight brake pedal stutter after new pads

      By MBS206 · Posted

      What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • bcozican
      R32 Gtst - Track Car

      By bcozican · Posted

      Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
    • PranK
      Slight brake pedal stutter after new pads

      By PranK · Posted

      Thanks, will do that.  Thankfully they still feel great.
×
×
  • Create New...