Jump to content
SAU Community

Recommended Posts

i think ill go back to 98 so i can shot flames as well and melt the farken rear bar off

Less rear bar = less weight = faster times ;) i like your thinking

i had a great day on Monday first time for me on the track and have heaps to learn, was a nice group of people to be with thanks to all who made it happen and thanks to Dave for lending me his oil cap and helping me with some catch can issues

Was nice to meet you mate! Looked like you were having fun :)

Yep!

Late to the party

Big thanks to all the hard work behind the scenes from the exec team

A big thanks to everyone who entered and had a great time this is why we run these events

I hope everyone enjoyed themselves and any feedback you want to give back to the club please feel free to PM me and I'll pass it on

Great to see so many first timers on the day improve as the day went on

Hopefully next year I won't just be running around and beout on track with you (in my own car)

Thanks to mat for giving me a steer of his car was good fun

  • Like 2

seeing as we weren't allowed to do cool downs down the road way I think SMSP should supply cooling fans to use at our leisure :P

it's ok tho next time I'll have my upgraded oil coolers with thermo's on them so won't be a drama!!!

First time out with the club for me and first time on a dry track. Had a ball, was great to meet everyone and I'm very pleased with my 1:12.3 on (cheap) street tyres & stock engine.

Thanks to all who made the day happen, and to Nick for helping shave a few seconds off my time.

I took some vids throughout the day:

The flaming GT-R

All the footage I have from chasing other people's cars

And my (2nd) best lap:

I could only get 3-4 laps in before oil went past 120degC, need an oil cooler badly.

Wow no good!

I was happy with the temps for this event, i could belt around for multiple laps no problem, only letdown was the front tyres...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
    • Assuming your brake pads are not worn right down, I'd add a little brake fluid. Is there any sign of a brake fluid leak?
    • Hello all,  I need of some help. On my drive home my handbrake light lit up and started flashing. When I got home I checked my handbrake sensor under the centre console and nothing seemed out of the ordinary. I have scanned my car via the consult port, no codes shown. Checked my brake fluid as well which is half full. Tried unplugging the brake master but it didn't change anything. Thoughts on what it could be? The master float doesn't seem to be stuck. My car is an 1998 ER34 sedan GT. No hicas but has ABS Photos below 👇🏾 
×
×
  • Create New...