Jump to content
SAU Community

Recommended Posts

  On 27/02/2015 at 5:41 AM, Piggaz said:

It won't want to putter around, it'll want to turn tyres everywhere!

Paulie Paulie Paulie , you do not have to disappear in a cloud of smoke going to Woollies :)

I am not going to change anything again, if it runs anywhere near what I want, thats farken it, no more of this shit!

Do they have a dyno and a tuner? It should start up and be run in on the dyno and tuned and then ideally you will get another tune when its done about 10,000.

  On 27/02/2015 at 6:41 AM, KiwiRS4T said:

Do they have a dyno and a tuner? It should start up and be run in on the dyno and tuned and then ideally you will get another tune when its done about 10,000.

Hi Bob, this is CRD they do cars internationally and have a pretty good reputation. Their work seems tough and stands up to hard driving.

I just cannot handle the time shit, there is no need for it , especially from a company that can do this type of specialty work.

  On 27/02/2015 at 8:41 AM, luke gtr said:

Oh, the fact you have an extra .2l should also help off boost.

Hi Like, .2L,? 2.6 t0 3.2 = .6L to help off boost ?

  On 27/02/2015 at 8:40 AM, luke gtr said:

2k is a plentiful run in period.

If I follow instructions, 1000k should do it, but that is like driving home and back to Sydney. I will be working the motor on the way home, about 350Klm, change oil, do another 500 and change again and do some more Ks, book it in and back to Sydney for the tune, hopefully for the last time to do with the car, well that is, if I ever get it back :)

  On 27/02/2015 at 5:25 PM, Nismo 3.2ish said:

Hi Like, .2L,? 2.6 t0 3.2 = .6L to help off boost ?

Luke has a 3.0, you have a 3.2. Basically means you're gonna have more grunt naturally without the aid of the turbo.

Some movement but the bonnet is back on why do that before all of the motor work is done , it would only get in the way, yes/no? see what has happened, you blokes have got me all paranoid :(

post-52098-0-47617700-1425061835_thumb.jpg

  On 27/02/2015 at 7:06 PM, Piggaz said:

Only the turbo to be bolted up. If they can't do that with the bonnet on then they should be sacked. :P

yeah BUT, you trust people :)

Oh, I would sack someone!

  On 27/02/2015 at 6:31 PM, Piggaz said:

Luke has a 3.0, you have a 3.2. Basically means you're gonna have more grunt naturally without the aid of the turbo.

Got ya :)

  On 27/02/2015 at 9:03 PM, Sinista32 said:

You will likely get a small vid of it running next week.

and you will be off to pick it up

That would be soooooooo GOOOOOOOOOOD!

But I will not hold my breath :(

  On 27/02/2015 at 9:51 PM, r32-25t said:

I don't know why they took the bonnet off at all, Ive done multiple engines in skylines and never take the bonnet off

I thought it would make it easier ?

4 bolts. 10 mins effort

makes it easier to work in the bay. Safer for the protection of the bonnet.

Saying that I see a lot just use an extension type bar on the bonnet to hold it up higher

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey guys Long time lurker, I daily a nm35 stagea 250t rs four and I've had it for almost 2 years (very reliable 馃憣). Issues or just looking for information ill always find myself here having a read, so thought id join.  3inch stainless intake, pod filter, AM performance turbo dump pipe, 3inch hotdog, 3 and half inch stainless to 3 and half inch AM performance blast pipes. Bc racing coilovers. 18inch rims Hdi intercooler and trans cooler soon.  Here's my car
    • thanks for the advice on the box... i was thinking the 6 speed was better for cruising on the highway but on closer inspection and comparison the Rb 5 speed box was not too different...  So the choice is going to be the RB25 box... if I can save up and find one at the right price  
    • Thanks Matt, yes that's what i am aiming for. Just going to apply the right voltage and grounds to the dash connector. Hence my search for these pins... any chance you know if these pins are in the same spot as the ones on the S15 Dash connector? as mentioned above on page 8?
    • Yes, unfortunately that's the one. Signal was noisy to begin with; after driving once and looking back at the logs I saw pressure constantly swinging between 0-200psi, or staying at 0 randomly for a few seconds. There's a lot of good sensors that share the same look and feel, so don't presume they're all bad. I bought mine for 20$ off Amazon and I should have read the reviews prior, as it's clear they're junk.  I purchased a lowdollerr motorsports sensor. 
    • wedding eh.....I seem to get to more funerals than weddings or christenings these days....
  • Create New...