Jump to content
SAU Community

Recommended Posts

This is totally insane! Your attention to detail is staggering. So awesome.

Could you please PM any other pics you might have of that crossmember ? (Please) :-)

Also could you please take x1000 photos showing absolutely everything once its complete so we can all have some alone time with some good material :-)

This is totally insane! Your attention to detail is staggering. So awesome.

Could you please PM any other pics you might have of that crossmember ? (Please) :-)

Also could you please take x1000 photos showing absolutely everything once its complete so we can all have some alone time with some good material :-)

Cheers man thanks for the nice comments. Probably my last big build so i thought id build it properly ;) haha.

Next time its on the hoist ill get some more pics of the crossmember for you RIPS does awesome work.

Ill have some more pics for sure over xmas time.

  • Like 1
  • 2 weeks later...
  • 2 weeks later...
  • 3 months later...

No real progress was made over xmas unfortunately way too much beer consumed :/

What i did decide on recently was to upgrade from the M800 to the new M150.

Unfortunately we needed to change CDI modules as the M150 wouldn't talk to the Motec CDI8... Yes i know :angry2:

New bits arrived today. :cheers:

post-20010-0-77993400-1458810097_thumb.jpeg

And the good news is the car was delivered back to my good mate / fabricators last night to continue on with last few bits of work left.

Updates over the next few weeks..

  • Like 1

Great looking car and fantastic build - looks like you've thought of everything. Plans for anything other than the 1/4 mile?

I hope so although i always seem to find something new and improved id like to add haha thanks mate.

I really wanted to build this as a street going car but rules and regs and police just make it so hard now.

Apart from the 1/4mile stuff it's just a car to go out and have some fun in, events like roll racing and powercruise both of which don't require registration.. Powercruise u can take passenger so that should be fun haha.

What would've been cool are the Motive GTR drag battle and new 1/2mile but both require registered cars for insurance purposes unfortunately...

Struggling at the moment to find room for a large enough air filter. The car was built with the intensions of not running one but i chickened out and purchased a 7" round 16" long K&N but looks like it won't fit where i was hoping without some more mods moving stuff around and re-coating the intercooler :/

  • 1 month later...

Yep been progressing slowly but surely.

Under dash harness re-pinned for the M150 and re-installed into the car. Lucky we did bulk head connectors on the firewall made removing the harness easy and saved engine harness removal.

post-20010-0-13351600-1462098216_thumb.png

Final fitment of the oil and fuel pumps.

post-20010-0-57592200-1462098464_thumb.jpg

Oiling system completed.

post-20010-0-55776100-1462098572_thumb.jpg

post-20010-0-43779600-1462098691_thumb.jpg

More updates tomorrow.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...