Jump to content
SAU Community

Recommended Posts

Been working on it doing a little bit at a time

To clean the engine bay up a little more I moved the battery into boot

A9EB8BB4-B3C0-4EEE-B103-87231CECFC5D.jpg

Started with it in the normal place, which it never fit correctly due to being to short

E3F18747-9190-4C2B-93D5-641883E58F6E.jpg Ran the wiring through the car to hide it all

Then bought a battery tray from one stop batteries and proceeded to mount it in the boot

Started by putting 4x 8mm rivnuts into the boot floor

8D2A5B58-AB58-4B74-9BC5-1DD459FFEF9F.jpg

After vacuuming out the metal shavings I then bolted the battery tray into position 28AB60C8-28C3-456B-8FFD-BEFA16A96BC5.jpg

There is a big main fuse behind the battery for exactly that reason, the wiring is also secured down (didn't get a photo of it) and any where there are sharp edges there is rubber lining them to even further prevent that from happening

Test fitted it to make sure i didn't stuff up my measurements

192BF300-A942-47AF-BA4B-1114774EDCE9_1.j

Made and welded a bracket to go to the original bolt hole for the battery bracket and put a filter on, had planed to do something a bit different for that but the neatest way ended up being to just fit the filter there

7B5A4E4B-A377-4440-8AEA-440D7428FB29.jpg

Then after another trip to the fitting shop I swapped the 90° fittings for some 45s and made up the lines and fitted them

14D76D4C-1A30-461E-A4F8-EECD45B2C4D7.jpg

Im going to grab some hose spacer/holders for the lines to tidy it up a little, I also plan to powder coat the catch can but that can wait for now

  • 3 weeks later...

Had the car detailed by Eugene and what a difference he was able to make to the paint. It now has so much more depth and the swirl marks are all gone. It has actually changed the colour of the car (in a good way) and it looks like the day I purchased it in 2003 again

The reason for having it detailed was I had entered it into the show and shine at the Gtr festival at wisd today

Quick snap taken by the wife

F6472B47-E25E-4E75-AC90-EAF6059594DA.jpg

Oh and I changed the wheels lol :D

  • Like 3
  • 2 weeks later...
  • 4 months later...

Been a while but have been really the last couple of months 

a couple of months ago I decided I'd go for a drive to gosford with it. Well I didn't make it due to a it over heating and had it towed back 

got home and opened the radiator and blocked would have been an improvement compared to what I could see in there

IMG_4189.JPG

  • 1 month later...

When you installed the valve springs, did you find it unnecessary to upgrade the retainers aswell?

Only asking, as ill be putting cams and headstuds into my car, and thought while I was there would up upgrade the springs and possibly the retainers. 

 

The springs I used didn't require retainers, I'm also not reving the engine fast enough and by using the original ones it also meant I knew I wouldn't have to adjust any of the valve clearances 

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...