Jump to content
SAU Community

Recommended Posts

14 minutes ago, Leroy Peterson said:


Im kinda surprised you can get it off the shelf with your shoulders and height.
I struggle with getting shoulder width to match neck thickness, then pants length with waist. Damn people are either too skinny, too tall to too big. And im none of those.

Generally they allow you to mis match

So i sometimes go one size up on the suit jacket relative to the pants

I've got both, tailored obviously better but off the shelf still very decent if you get the right one, pretty sure the only reason my off the shelf one isn't as nice these days is because I've gained weight :P 

next one I know of:

 

http://ffcc.com.au/event/group-5-motorkhana-round-7-3/


DECA have changed up a few things so there is some changes coming for SAU Vics next one.

Not going to give the game away in advance, but I will be lining up for the first tickets..

15 hours ago, emts said:

just curious have you tried a tailored suit?

 

the first time I got one and the jacket just slotted into position...the most comfortable clothing I own.

 

 

I got 2 tailored suits dont really wear them much.

For me off the shelf is pretty much 90% there in terms of fitment. If the extra cost is worth it to you for that fitment then by all means

I generally wear Peter Jackson suits and have them tailored slightly

Ususally buy them on sale Cheapest was $200 and most expensive was like $480 (normally $6-800) ea

 

Hypothetical work situation:

Supplier 1: offers service for $2k that will guarantee successful outcome, cost has been approved by management, but you know the company is getting ripped off and you despise getting ripped off / feel morally obliged to do what's best for the company by finding a cheaper alternative.

Supplier 2: offers same service for $1200, potentially saving the company $800, but no one will ever know or care that you achieved this saving and so you won't be extrinsically rewarded for it, however if they don't come through with the goods, it's your ass on the line.

What do?

Extreme example of non vs tailored look

Mens-bad-suit.jpg

If you're lucky you can find an off the shelf that can be taken in to achieve 90% of a tailored look, but will never be completely there or as comfortable

16 minutes ago, Birds said:

Hypothetical work situation:

Supplier 1: offers service for $2k that will guarantee successful outcome, cost has been approved by management, but you know the company is getting ripped off and you despise getting ripped off / feel morally obliged to do what's best for the company by finding a cheaper alternative.

Supplier 2: offers same service for $1200, potentially saving the company $800, but no one will ever know or care that you achieved this saving and so you won't be extrinsically rewarded for it, however if they don't come through with the goods, it's your ass on the line.

What do?

Supplier 1... They understand the value of their service and know that they are going up against people quoting 40% cheaper. There's a reason they quote $2000.

Supplier 2 has to be cutting something out, whether the end product is going to reflect that is anyones guess. Is it worth taking the risk (even when its not your own 88e money)? Probably not.



Edit: We've actually had quoted customers come back to us and say that we need to quote higher, since they wanted to go with us but the company policy was to never go with the cheapest quote for a service. Resubmit the quote 30% higher and we'll get the deal.

  • Like 1
Hypothetical work situation:
Supplier 1: offers service for $2k that will guarantee successful outcome, cost has been approved by management, but you know the company is getting ripped off and you despise getting ripped off / feel morally obliged to do what's best for the company by finding a cheaper alternative.
Supplier 2: offers same service for $1200, potentially saving the company $800, but no one will ever know or care that you achieved this saving and so you won't be extrinsically rewarded for it, however if they don't come through with the goods, it's your ass on the line.
What do?


You go with supplier 1.
  • Like 1
1 minute ago, Odium said:

Supplier 1... They understand the value of their service and know that they are going up against people quoting 40% cheaper. There's a reason they quote $2000.

Supplier 2 has to be cutting something out, whether the end product is going to reflect that is anyones guess. Is it worth taking the risk (even when its not your own 88e money)? Probably not.

Should have added that this is for freighting stuff, so in terms of quality of outcome there's little difference except risk of fk ups / delays in delivery which admittedly haven't been experienced before when using supplier 2. Supplier 1 also has a monopoly as a preferred freighter so charge based on their name. But fair point that they quote what they think they can for a reason.

Supplier 1.
$800 more expensive is sort of a drop in the ocean for a reliable and guaranteed service. Unless we're talking like office coffee supplier or something.

Also lol, would never wear a suit that looked like that extreme non-tailored look. I just wasn't sure of the limitations of alterations...
When it comes to colour and pinstripes n shit, it's just down to preference yeah? I could Google this shit, but I'm expecting shitty Gentleman Quarterly articles about needing 12 suits for different occasions, and $450 ties for men who earn $450 a week making coffee for a living.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...