Jump to content
SAU Community

Recommended Posts

Ask 10 people what's the best oil, you'll get 10 different answers.

Don't stress about it. A very small percentage of people are oil nazis, and they can go read bob the oil guy all they want.

For the rest of us, a reputable brand 5w-40 or 10w-50 is fine for 95% of drivers here.

Link to comment
https://www.sau.com.au/forums/topic/458795-oil-replacement/#findComment-7581640
Share on other sites

thanks steve and alex , I have some info,the only reason I ask is im about to install a new oil cooler and oil pump and filter relocation kit.

engine oil

MOTUL 300v 20w 60

Castrol edge 10w 60

gearbox

redline mt 90

attessa

nissan oem d matic

diff

motul gear 300 lsd fluid

also royal purple has been recommended

Link to comment
https://www.sau.com.au/forums/topic/458795-oil-replacement/#findComment-7582007
Share on other sites

I have MT90 is my S14 box, going to dump it shortly, seems to be too thick for the application

Hard to shift into second when cold, gets better when warm but still not as what I would have liked. Really sucks taking off from a set of lights and trying to force it into 2nd, while some daewoo is tailgating and trying not to crunch the gears

Link to comment
https://www.sau.com.au/forums/topic/458795-oil-replacement/#findComment-7582235
Share on other sites

I basically went to autobahn grabbed motul full syn gbox, engine, diffs , coolant, everything, cost 500 got a 100 discount for spending so much.

I'm a MOTUL biased whore.

tracked all my litre bikes for years on the shit and never had an issue so I just stuck with it but there are many good full syn oils out there now days..

Link to comment
https://www.sau.com.au/forums/topic/458795-oil-replacement/#findComment-7583048
Share on other sites

  • 2 weeks later...

no worries skidza ,

any problem with filter relocation kits ?

as a mate said his motor rattles for the first few seconds ,until the pressure builds up ,

I thought there would be oil pressure in the lines.

Link to comment
https://www.sau.com.au/forums/topic/458795-oil-replacement/#findComment-7591346
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...