Jump to content
SAU Community

Recommended Posts

Some more pics of the carnage

 

IMG_20230925_143532307.thumb.jpg.6cf1052a6e8444e68e9f7cd8e99653bc.jpg

 

 

IMG_20230925_143542191.thumb.jpg.3f6e30e312f2a522947e86d5ee1f640d.jpg

 

IMG_20230925_143535126.thumb.jpg.a5489d8126183108432c000b86a11e04.jpg

I had been saying I felt like I was on borrowed time with this engine. Maybe I should invest in a crystal ball and charge people to tell them their fortunes. Pay for a new engine in no time.

My bro science failure analysis. Looks like a rod bolt let go. Google says this is usually from excessive rpm. I was keeping it to the usual rpm of 7-7200, did hit the 7600 limiter once during the day. My theory is metal fatigue/stress on the bolt from prolonged high rpm/torque/hp over time and that particular bolt reached it's break point yesterday. We can speculate forever but what's done is done. I suppose it was inevitable and just my turn. Ive had a decent run over the last 7-8 years.

 

Trying to weigh up my options. Obviously this engine is now scrap, I doubt anything will be salvageable. If the head somehow managed to survive, that would be a win.

 

 

Fark... at least you had a good run in it and also used it.

Stock NEO motor going in? (Don't make the mistake of opening it like I did.. Pandora's box dis dat).

  • Like 1

The options running through my head are

1. Good 2nd hand R33 RB25DET

2. Buy a suit rebuild 25 and have built

3. RB25/30 (would depend on if my head is good)

4. LS not going to happen.

5. Sell car as is complete

6. Part out

 

Option 1 would be great but as we all know they're pretty hard to come by these days and a good one is almost rocking horse poo. I made some calls today and couldn't find one but apparently the going rate is $30-3500 for a good long block. One bloke reckons he may have 1 in a few weeks, otherwise will be getting some from Japan in the new year.

Obviously a 2nd hand engine is like rolling the dice. Could end up with something that needs rebuild. I don't really feel like playing that game. The more I think about it the more I feel like selling as is would be the best option. I'll happily take 15k for it.

I do have time on my side, so I'll try to be patient. I'd prefer if I could see a 2nd hand engine running and can hear, comp test it. Definitely not buying off some flog on market place with an engine that looks like it was at the bottom of a river for 6 years. 

On 25/09/2023 at 7:08 PM, Dose Pipe Sutututu said:

Fark... at least you had a good run in it and also used it.

Stock NEO motor going in? (Don't make the mistake of opening it like I did.. Pandora's box dis dat).

I would like to keep things simple, I don't want to have to rewire, retune or touch anything I don't need to. So an R33 RB25DET is the preference. See above post for my concerns, lol. 

 

On 28/03/2023 at 11:10 AM, Dose Pipe Sutututu said:

find a RB25DE NEO (yes no T), keep it as a spare motor, those things take some abuse as well!

 

So there is one of these things here locally for 1k as a long block. Pretty sure these have 10:1 comp. Wonder if a 33 head is bolted on where comp would end up? If the 33 head would work it could be a good option as the rest of the 33 gear would bolt up. Would just need to sort oil and water feeds and returns.

I've been googling trying to find the cc of the rb25de head but can't find an answer. Not sure if it's same as neo det which is 51.5cc. Anyone know?

38 minutes ago, admS15 said:

Wonder if a 33 head is bolted on where comp would end up? 

Could also reduce the comp with a slightly with different head gasket.

Nearly feels like @GTSBoy needs to spend 20ms to work it out for you 

Pull the head and see what the damage is.
Another rb25 is the go. Rebuild another motor with rods & pistons, oil pump and oil mods. Enjoy the rest of your ownership stress free.

The hassle of selling would be more stressful than building a motor

 

  • Like 1

Pull the head, then if it truly is okay, RB30 with a mysteriously similar engine number to your current windowed block.

Failing that, just buy someone else's car and part out. You'll probably save money, given how well modified cars actually sell vs stock.

  • Like 1

I don't really know if the NeoDE head is the same volume as the DET. It could be. It would only take a tiny bit more piston dome to pump the comp up.

I could do a bunch of quick and dirty calcs to come up with speculative numbers for CR with 33 head on NeoDE bottom end, but they'd be about as good as a random number generator.

One thing that is true is that the 33 head on NeoDET bottom end is no damn good. There's an extra 11 or 12 cc in the head, and that's a big drop. If there is any commonality in the NeoDE and DET heads, then the difference is all in the piston and maybe a 33 head on NeoDE block would come out alright. But if the difference is in the head, then....likely be a low compression failure, same as the first sentence in this paragraph.

  • Like 1

Or just buy the RB25DE NEO slap on your turbo setup, and send it to the moon.

Solid lifters ftw!

You can transfer your entire intake manifold over onto the NEO motor and only need to redo the plug on the VCT solenoid. Hot side just send the lot across.

Here's the video I saw before,411kW on a DE NEO 😊

 

  • Like 1

So, I can point you towards;

  • Block 1. RB25 NA. Missing #1 piston and rod, but what is there is all healthy.
  • Block 2. RB20DET. Ignore.
  • Block 3. RB25DE Neo. As new. Ex Demo, almost zero mileage. No pistons and rods. I have touched the bores in this and they are really virginal. Well, except the one I put my fist into.
  • Block 4. RB25DET. No crank or rods/pistons. Engine number has been XXX'd out.
  • Block 5. RB25DE. Complete with sump and oil pump (I think). Apparently looks very good.

He also has 23 others that he can't get to at the moment, so not clear on the details. There are also multiple R33 heads and one Neo headed 3L. Can put you in touch. All this stuff is in SA.

On 26/09/2023 at 10:50 AM, Dose Pipe Sutututu said:

Or just buy the RB25DE NEO slap on your turbo setup, and send it to the moon.

Solid lifters ftw!

You can transfer your entire intake manifold over onto the NEO motor and only need to redo the plug on the VCT solenoid. Hot side just send the lot across.

Here's the video I saw before,411kW on a DE NEO 😊

 

Is it the same for Neo det head, my 33 manifolds bolt straight on? Can I use my 33 cas as well?

On 26/09/2023 at 10:53 AM, GTSBoy said:

So, I can point you towards;

  • Block 1. RB25 NA. Missing #1 piston and rod, but what is there is all healthy.
  • Block 2. RB20DET. Ignore.
  • Block 3. RB25DE Neo. As new. Ex Demo, almost zero mileage. No pistons and rods. I have touched the bores in this and they are really virginal. Well, except the one I put my fist into.
  • Block 4. RB25DET. No crank or rods/pistons. Engine number has been XXX'd out.
  • Block 5. RB25DE. Complete with sump and oil pump (I think). Apparently looks very good.

He also has 23 others that he can't get to at the moment, so not clear on the details. There are also multiple R33 heads and one Neo headed 3L. Can put you in touch. All this stuff is in SA.

Yes please, forward me details via pm.

Sounds like an Aladdin's cave of RBs

38 minutes ago, admS15 said:

Is it the same for Neo det head, my 33 manifolds bolt straight on? Can I use my 33 cas as well?

Just use the CAS on the R34 motor, reverse the pins.

So say if on the R33 CAS it's 1 2 3 4, now reverse the pins on the plug so it's 4 3 2 1.

On 26/09/2023 at 11:53 AM, Dose Pipe Sutututu said:

Just use the CAS on the R34 motor, reverse the pins.

So say if on the R33 CAS it's 1 2 3 4, now reverse the pins on the plug so it's 4 3 2 1.

It's just that the rb25de neo I was looking at doesn't come with the cas, well it's not pictured anyway. So 33 cas is no go then?

So with a proper RB25DET NEO like yours, just in case I come across 1, can R33 intake manifold work? I vaguely remember you had some troubles trying to do that with yours. Refresh my memory please,lol.

Unless you have a plastic CAS, it won't go on the R34 exhaust cam, so you'll need a R34 CAS or a 1997/98 R33 CAS.

Intake manifold wise, I tried to use the R34 one and fit half height top feed injectors. It clearly didn't work, you need 3/4 or full height injectors, hence I ended up going back to the R33 intake manifold.

Other than that, everything bolts up. 

  • Thanks 1

Dang, that's shit. 7-8 years is good, but still shit. :(

I'm super keen to see where this goes tho, theres some good banter in here already and I'm in for the ride.

Could always swap it out for a BMW N54. Duncan love these. 

  • Like 1
  • Haha 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What are we supposed to be seeing in the photo of the steering angle sensor? The outer housing doesn't turn, right? All the action is on the inside. The real test here is whether or not your car has had the steering put back together by a butcher. When the steering is centred (and we're not caring about the wheel too much here, we're talking about the front wheels, parallel, facing front) then you should have an absolutely even number of turns from centre to left lock and centre to right lock. If there is any difference at all then perhaps the thing has been put back together wrongly, either the steering wheel put on one spline (or more!) off, and the alignment bodged to straighteb the wheel, or the opposite where something silly was done underneath and the wheel put back on crooked to compensate. Nut there isn't actually much evidence that you have such a problem anyway. It is something you can easily measure and test for to find out though. My money is still on the HICAS CU not driving the PS solenoid with the proper PWM signal required to lighten the load at lower speed. If it were me, I would be putting either a multimeter or oscilloscope onto the solenoid terminals and taking it for a drive, looking for the voltage to change. The PWM signal is 0v, 12V, 0V, 12v with ...obviously...modulated pulse width. You should see that as an average voltage somewhere between 0V and 12V, and it should vary with speed. An handheld oscilloscope would be the better tool for this, because they are definitely good enough but there's no telling if any cheap shit multimeter that people have lying around are good enough. You can also directly interfere with the solenoid. If you wire up a little voltage divider with variable resistor on it, and hook the PS solenoid direct to 12V through that, you can manually adjust the voltage to the solenoid and you should be able to make it go ligheter and heavier. If you cannot, then the problem is either the solenoid itself dead, or your description of the steering being "tight" (which I have just been assuming you mean "heavy") could be that you have a mechanical problem in the steering and there is heaps of resistance to movement.
    • Little update  I have shimmed the solenoid on the rack today following Keep it Reets video on YouTube. However my steering is still tight. I have this showing on Nisscan, my steering angle sensor was the closest to 0 degrees (I could get it to 0 degrees by small little tweaks, but the angle was way off centre? I can't figure this out for the life of me. I get no faults through Nisscan. 
    • The BES920 is like the Toyota Camrys of coffee machines. E61 group head is cool, however the time requirements for home use makes it less desirable. The Toyota Camry coffee machine runs twin boilers and also PID temp control, some say it produces coffees as good as an E61 group head machine.
    • And yes with a full tank it will hit limiter free revving or driving 6B6CDF6E-4094-426D-A9CB-6C553475FE36.mp4
    • One way of putting the fuel surge idea to rest, is that even when in neutral/clutch in or free revving it still has the same issue, it can’t even get to limiter (7800) so to me that says it can’t be g force, I’m not trying to argue I just want to find the f&$king issue 😡
×
×
  • Create New...