Jump to content
SAU Community

Recommended Posts

Up for sale is my r32 gtr ( r32,4 gtr ) needs some love and attention:

the fibre glass wide body kit has stress cracks in some spots. will be sold with space saver wheels. will need to be towed.

car is also runing stock ecu ( it will start,but its rough due to not liking having no afm and running 800cc injectors) for the time being while the vipec ecu gets checked over as car wouldnt start with it. possible damage to the board from hooking up battery wrong way,

engine possibly needs a new head gasket and/or valves cleaned for sitting for a long time. has low compression on 2 of the cylinders due most likely to those reasons.

as for the good bits, Interior is in good condition,shouldn't take much to get it going.

Would suit someone who knows what they're doing or has a budget to get it running and looking good.

will look awesome with some TLC

Also just put in new NGK BCPR7ES spark plugs, new Optima Yellow D51R-T1 battery and a new POD filter.

probably alot of other mods i don't know about

would make an awesome track/drift car

car is full of potential in the right hands. my knowledge of cars was my let down but someone with more knowledge could make this car shine and become a beast of a GTR

Car has 117,502 kms . car has no been driven in a few years

Engine:

RB26
T04R Single Turbo kit
Stainless Manifold,
60mm Tial Wastegate
Tomei 260 Poncams
Tomei adjustable cam gears
Sard 800cc Injectors
Sard 280ltr Fuel Pump.
Gates timing belt.
R33 oil pump
Braided fuel lines.
Management:

Vipec ECU

as well as stock R32 ECU
Suspension:
Tein Mono-flex fully adjustable coilovers
Cusco rear strut brace
Driveline:
Stock 5 speed
Exedy triple plate clutch
Nismo short shifter
Brakes:
R33 GTR Brembos calipers all round.
DBA slotted rotors.
R33 GTR ABS unit.
Wheels:
space saver wheels (lol)
Interior:
Recaro SR reclinable drivers seat.
Jaycar speakers all round
Nismo 260km Cluster
2/4wd Switch.
Turbo timer
Viper Alarm
EXHAUST:
4" Veilside exhaust from Turbo back. With 2 centre mufflers (quiet)
Exterior:
Customised Full genuine Bee-R (B324r) Widebodykit with R34 gtr front end.
R34 Xenon headlights
Sparco alloy fuel cap.

post-14097-0-11352500-1446196425_thumb.jpgpost-14097-0-48395100-1446196541_thumb.jpgpost-14097-0-18371700-1446196551_thumb.jpgpost-14097-0-63155500-1446196560_thumb.jpgpost-14097-0-07759100-1446196592_thumb.jpgpost-14097-0-54672600-1446196601_thumb.jpg

what the car used to look like before previous owner painted Matte Black

post-14097-0-32123900-1446196639_thumb.jpg

$8,000 ONO

Edited by deprived777
Link to comment
https://www.sau.com.au/forums/topic/460690-r324-gtr-victoria/
Share on other sites

PRICE DROP: $7,000 dropping price due to realising car will need some money put in it to get it perfect. if someone parted this out they would quite easily make profit. i just don't have the time,knowledge or patience to do it myself. Or invest time and money into it and have an awesome looking car that will turn heads. i've never seen another car like this on the roads personally

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
    • FYI: Racebox RE7R Custom Tunes Released!   https://goracebox.com/.../2017-infiniti-q50-q60-re7r-tcm...   FOR GEN 2 (21+) VEHICLES, PLEASE SEE NOTE AT BOTTOM See more   But whomever tuned your car is the tuner you should go back to, AMS, Sonictune or BT Tune....
×
×
  • Create New...