Jump to content
SAU Community

Recommended Posts

Well, the gtrs rear is the same as the -5/63 etc, I was just noting that there was an option out there that had the same flow as them except a smaller lighter wheel.

Simon may have had heat issues on the track, but he did have the response of -5s and almost 500awkws aswell, noting it would be a pretty kickass Street combo

Twins are gaids, only really works on a V6 or V8 or so when you have separate plenum a for the group of cylinders that are huffing into the turbo.

Twin scroll is where it is at, less restriction better efficiency and less piping and all the other bullshit associated with twins.

Look at Piggaz I told him over 6 years ago (not kidding) and look at him now. He's woken up to reality :)

  • Like 3

I went built motor with a t51r [emoji16] even that was more fun

Prior to the rs's I had 2530 and they were heaps better. I bought the gtrs's just to try something different but the amount of shuffle made them absolute shit to drive with. I could not accelerate in 5 gear cruising on the freeway. I always had to drop back a gear.

  • Like 1

Turbo is a nugget doesn't matter what engine is bolted to it's garbage much better options out there especially for the money they ask.

you just have to measure the front compressor wheel and then measure the turbine wheel.

it's the same as boosting your car to 50 psi and leaving the 2 inch exhaust on who cares what air you can get in you'll never get it out.

Edited by mr skidz
  • 2 weeks later...

Got out of a stock 2.6 with a dirty old T04Z open scroll today.

Was actually quite impressed. 4500 rpm and was cracking gates, yet made 450 rwkw on unigroups dyno. Straight back onto song between gears.

Makes me upset why I've been playing in the sandpit for the last 9 years with twins.

  • Like 1

Got out of a stock 2.6 with a dirty old T04Z open scroll today.

Was actually quite impressed. 4500 rpm and was cracking gates, yet made 450 rwkw on unigroups dyno. Straight back onto song between gears.

Makes me upset why I've been playing in the sandpit for the last 9 years with twins.

Dry sump might be next on that list.

Got out of a stock 2.6 with a dirty old T04Z open scroll today.

Was actually quite impressed. 4500 rpm and was cracking gates, yet made 450 rwkw on unigroups dyno. Straight back onto song between gears.

Makes me upset why I've been playing in the sandpit for the last 9 years with twins.

Bet the power delivery was fun.

Bet the power delivery was fun.

It was.

Linear, quick to fall back into its stride. I would 100000% prefer that than a set of -5's (let alone a set is RS's) on a stock engine. Makes me very curious to see what a 3582R would do on the same setup, being smaller.

That was an old dinosaur garrett Z, open scroll, single gate setup.

It was.

Linear, quick to fall back into its stride. I would 100000% prefer that than a set of -5's (let alone a set is RS's) on a stock engine. Makes me very curious to see what a 3582R would do on the same setup, being smaller.

That was an old dinosaur garrett Z, open scroll, single gate setup.

Went in a stock 26 with 3582 once, man the power rush is hilarious.

Until fuel pump wiring fell out somehow (a donkey installed said pump) stopped me from buying that R.

Been debating whether to man up to get one for a couple of years, living close to Knox didn't help haha.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Kinda glad I never got to this ..    https://www.facebook.com/groups/1483859159195077
    • @GTSBoy This method was able to get readings of -10 to -2, so it looks like its monitoring.  Now I need to figure out why the vacuum on the line provided isn't alternating with manifold pressure.  I went with 2 lines that an RB25 tuner recommended but I'll get a longer hose and try directly off the back of the manifold.  He may have been used to OEM intake setups while I have a DBW setup that removed the MAF and IACV.  
    • I work at a car detailing and tinting shop called Quark which gets all manner of German cars in usually (mainly due to a contract with Mercedes Benz Kita Osaka, BMW Nishinomiya and others) but every once in a while something special comes in, like a fully restored 1972 HS30 Nissan Fairlady 240ZG... The shop owner had immediately started applying film to the windows as soon as it was in the shop so the interior was completely covered in towels and plastic sheets. But I could get a few photos of the engine bay which was restored like new. Such an amazing car to see in pristine condition in Japan these days.  
    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
×
×
  • Create New...