Jump to content
SAU Community

Recommended Posts

2 hours ago, Griffin said:

I've just gotten the 9174 running on rb26. Needs a tune. Alot better off boost but only makes  .5 bar at 4k rpm.

Will a tune fix the laziness much?

 

Ignore the boost gauge for a kick off mate. Get it dialled in and see when it boots you up the ass when you mash the loud pedal.  See how it responds to different throttle inputs etc

Just burying your foot on the accelerator and waiting for something to happen while watching your boost gauge isn't a good way to gauge how it's gunna drive. Especially if it's untuned. 

10 hours ago, Griffin said:

I'm not too clued up on the tuning side of it. How much of an improvement do you expect after tuned properly?

Stand alone ebc.

There is no fixed rule, sorry.  Depends on how far off the current tune is for it etc - the actual boost threshold is unlikely to change much unless there is something mechanically (cam timing/wastegate/leaks) making it laggier than it should be.

What exhaust housing is it running?  What was the previous setup, or should I say - what tune it is running on if it's not tuned for this setup?    If it's completely untuned then I would take anything of how it drives with a grain of salt, and really not be driving it at all.    

1.05 ts ewg. Previous turbo was 8370 wheel size Borg Warner journal bearing with internal wastegate that was too small to control boost.

Definitely a lot less restrictive now on the exhaust side.

Tuned on eflex with cam gears adjusted to suit. Has 264 greddy cams.

16 hours ago, HarrisRacing said:

These are my old pumpgas results on 8374 IWG with nothing more than changing cam settings (increased overlap).

 

 

 

where are they Pat , nothing to see ?

On 4/11/2018 at 8:50 AM, Griffin said:

1.05 ts ewg. Previous turbo was 8370 wheel size Borg Warner journal bearing with internal wastegate that was too small to control boost.

Definitely a lot less restrictive now on the exhaust side.

Tuned on eflex with cam gears adjusted to suit. Has 264 greddy cams.

I've taken the efr off and am going to sell it . Went back to a smaller turbo and couldn't be happier. 

I'll list it in for sale section if anyone is interested.

3 minutes ago, Griffin said:

I've taken the efr off and am going to sell it . Went back to a smaller turbo and couldn't be happier. 

I'll list it in for sale section if anyone is interested.

Did you actually get it tuned ?

 

What have you replaced it with ?

6 minutes ago, Griffin said:

No , pulled the plug before it became too used and worthless. 

Upgraded to a turbo off a tractor.

You mean downgraded to something better matched to what you wanted?

The 9174 was laggier than the old Airwerks ?

Yes correct. Tune would help. Ive got a forged 3025 neo and r33 gtst.ill put it on that if I don't find a buyer. Any help selling would be greatly appreciated. The one I put on is slightly similar to what came off but with t4 rear and better twin scroll manifold / external gate setup.

 

On 4/17/2018 at 6:45 PM, Griffin said:

Yes correct. Tune would help. Ive got a forged 3025 neo and r33 gtst.ill put it on that if I don't find a buyer. Any help selling would be greatly appreciated. The one I put on is slightly similar to what came off but with t4 rear and better twin scroll manifold / external gate setup.

 

So its like a Borg Warner S300SX 8375 or something - 60mm turbo?

I'll mention it to Kiwis who may want a 9174, you have the 1.05 hot side?

 

56 minutes ago, Lithium said:

So its like a Borg Warner S300SX 8375 or something - 60mm turbo?

I'll mention it to Kiwis who may want a 9174, you have the 1.05 hot side?

 

Yes mate to both questions.

What I'm using now is basically an 8370. It starts moving just after 2000 rpm.

It would be great to find a buyer thanks. 

7 hours ago, Griffin said:

Yes mate to both questions.

What I'm using now is basically an 8370. It starts moving just after 2000 rpm.

It would be great to find a buyer thanks. 

Can't promise anything but will mention it.

Where do you get an 8370!?  Never heard of such a combo

That's what the wheels measure up at. Extended tip compressor too. The first one I used on this car was off an eimco ed10. Screenshot_20180419-165043.thumb.png.5d86742b662ec24ce8cd2f0e13885fc9.png

That was '8374' size with cut down water cooled turbine housing. The one I just took off was '8370' with twin scroll t3 turbine housing and internal wastegate which the ports were way too small and not able to control boost.

The new one has the same size wheels in a t4 twin scroll housing but I've made it external waste gate. It works great.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...