Jump to content
SAU Community

Recommended Posts

Doing some basic tuning for now, double demerits too so don't want to risk my license.

Cars running on 7 month old E85, and seems to have developed a misfire with 1.4bar boost and above.

It's recently also got R35 coils and I've dialed up the dwell however it's still missing.

About 1.2/1.3bar it seems "ok", but I'll get it back on 98RON for a bit to clear up the system.

1bar at ~4000rpm

image.thumb.png.6c553ad9ecd2e555268ad51a9a3fca6a.png

1.3bar at ~4300rpm

image.thumb.png.975c0044d6f0b4eb1c0b8dfe0ab3dd6e.png

Noting the AFRs are shit house and I probably could still feed it a good amount of timing. Good to be behind the wheel again, and fuuark the dose is so good.

It sounds like a bus dosing, just goes suuuuuuuuuuuu when you back off lol

  • Like 1
23 minutes ago, Dose Pipe Sutututu said:

Back to reno photos, stone is now in.

Without doors 

20190610_090917.thumb.jpg.a7ea14c50989ae5d58cb6f7dc045434f.jpg

 

With doors 

20190610_100450.thumb.jpg.93001dd69a13863b72dc80ca766b7547.jpg

Looks mad, how many Litres/KG of load so you get with that washer? Have you thought of tuning it a bit to get some more spins out of it? 

21 hours ago, Murray_Calavera said:

That was a bit of a tease, let's see the timing table as well lol

Ask and you shall receive :)

Base Table

image.thumb.png.639569abc55c4b7d0f2e0171222ba818.png

 

Compensation Table aka E85 table

image.thumb.png.bb1523cffb0ef82ca342598aa181df2b.png

  • Like 1

Came to check out the car. Strangely intrigued by the laundry.
Where can I get some of that gourmet xúc xích pâté?
Sullivan's Cove, quite difficult to come by. How is it compared to the French Oak? Looks fancy.

Haha that pate was made by my wife and I at the Agrarian Kitchen in Tasmania, 2 day cooking class.

I actually got the bottle at Sullivan's Cove (as in the distillery itself). I can't remember the taste now lol.

Anyhow, one more laundry photo lolol.

20190615_180403.thumb.jpg.85b9148645e6a02f8ff894910eaf3240.jpg

  • Like 1
18 minutes ago, Ben C34 said:

When that laundry is 400mm underwater the tiles will fall off and you won't be able to sell your house ever.

Not sure I get what you're trying to say?

2 hours ago, Ben C34 said:

When that laundry is 400mm underwater the tiles will fall off and you won't be able to sell your house ever.

This isn't a don mega laundry. 

This is bok choy laundry. 

  • Like 2
  • Haha 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...