Jump to content
SAU Community

Recommended Posts

Doing some basic tuning for now, double demerits too so don't want to risk my license.

Cars running on 7 month old E85, and seems to have developed a misfire with 1.4bar boost and above.

It's recently also got R35 coils and I've dialed up the dwell however it's still missing.

About 1.2/1.3bar it seems "ok", but I'll get it back on 98RON for a bit to clear up the system.

1bar at ~4000rpm

image.thumb.png.6c553ad9ecd2e555268ad51a9a3fca6a.png

1.3bar at ~4300rpm

image.thumb.png.975c0044d6f0b4eb1c0b8dfe0ab3dd6e.png

Noting the AFRs are shit house and I probably could still feed it a good amount of timing. Good to be behind the wheel again, and fuuark the dose is so good.

It sounds like a bus dosing, just goes suuuuuuuuuuuu when you back off lol

  • Like 1
23 minutes ago, Dose Pipe Sutututu said:

Back to reno photos, stone is now in.

Without doors 

20190610_090917.thumb.jpg.a7ea14c50989ae5d58cb6f7dc045434f.jpg

 

With doors 

20190610_100450.thumb.jpg.93001dd69a13863b72dc80ca766b7547.jpg

Looks mad, how many Litres/KG of load so you get with that washer? Have you thought of tuning it a bit to get some more spins out of it? 

21 hours ago, Murray_Calavera said:

That was a bit of a tease, let's see the timing table as well lol

Ask and you shall receive :)

Base Table

image.thumb.png.639569abc55c4b7d0f2e0171222ba818.png

 

Compensation Table aka E85 table

image.thumb.png.bb1523cffb0ef82ca342598aa181df2b.png

  • Like 1

Came to check out the car. Strangely intrigued by the laundry.
Where can I get some of that gourmet xúc xích pâté?
Sullivan's Cove, quite difficult to come by. How is it compared to the French Oak? Looks fancy.

Haha that pate was made by my wife and I at the Agrarian Kitchen in Tasmania, 2 day cooking class.

I actually got the bottle at Sullivan's Cove (as in the distillery itself). I can't remember the taste now lol.

Anyhow, one more laundry photo lolol.

20190615_180403.thumb.jpg.85b9148645e6a02f8ff894910eaf3240.jpg

  • Like 1
18 minutes ago, Ben C34 said:

When that laundry is 400mm underwater the tiles will fall off and you won't be able to sell your house ever.

Not sure I get what you're trying to say?

2 hours ago, Ben C34 said:

When that laundry is 400mm underwater the tiles will fall off and you won't be able to sell your house ever.

This isn't a don mega laundry. 

This is bok choy laundry. 

  • Like 2
  • Haha 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
    • You think its the AFM? I know its a common issues on R32s. I find it coincidental how this issue raised right after cleaning the fuel system. As everything except the fuel system was fine before. I tried running it with the IACV unplugged but did not notice a difference and still stalled. However, the RPM gauge is not in the cluster right now, so I will need to connect the laptop again and use Nistune to check the RPM. I will check this weekend.
    • A wise man once told me, "Anything you enjoyed wasting was not wasted".
×
×
  • Create New...