Jump to content
SAU Community

Recommended Posts

This is why I struggled so much with continuing with the S13 rather than just dropping the good engine into an 86.

Ultimately, I'm only sticking with the S13 because I've had it so long and just don't want to sell it, simple as that. 

 

  • Like 2
22 minutes ago, ActionDan said:

This is why I struggled so much with continuing with the S13 rather than just dropping the good engine into an 86.

Ultimately, I'm only sticking with the S13 because I've had it so long and just don't want to sell it, simple as that. 

 

Nissan Autism over takes any common sense.

  • Haha 3

Where's any of these new euros in WTAC?

It's not that simple. What you're seeing is things like better matched turbos from the factory for displacement. AVERAGE power matters lol. Shifting speed with DCT etc matters. Yes, bump steer and kinematics do matter, but we're talking about racetracks here, not doing rally.

You used to have to mod cars a lot to get to where cars come out of the factory now. They come pre-modded, that's about it. It's absolutely easier to get a 340kw M4 Competition, because all it needs is a tune and comes with a 3L TT with tiny turbos ready to go, this is what you pay 140K for.

Remember, this is for fun. They are less fun.

Want to go fast? Buy an actual race car or an open wheeler and absolutely massacre any road car and laugh at them/us for even bringing a stupid boat out on the track. f**k, actual Go-Karts will turn better times if you want to do some insane superkart stuff before you die doing said superkart stuff.

  • Like 6
  • Haha 1

My way of thinking is I just love driving fast (in a controlled environment of course lol)
I love that my 32 has no driver aids and that I have to drive it.
I may only be doing 1.13's at Wakefield but Im on a buzz for a good few days after. 
New setup would be nice to compare if Wakefield reopens

Did the gokart thing (125cc Rotax 2 stroke) for a few years, but my 50 year old body cant handle the violence of extended karting sessions lol 

Modern cars, you are like a passenger, it does the driving while you sit back and enjoy the ride, sort of haha

  • Like 2
11 hours ago, Kinkstaah said:

Where's any of these new euros in WTAC?

It's not that simple. What you're seeing is things like better matched turbos from the factory for displacement. AVERAGE power matters lol. Shifting speed with DCT etc matters. Yes, bump steer and kinematics do matter, but we're talking about racetracks here, not doing rally.

You used to have to mod cars a lot to get to where cars come out of the factory now. They come pre-modded, that's about it. It's absolutely easier to get a 340kw M4 Competition, because all it needs is a tune and comes with a 3L TT with tiny turbos ready to go, this is what you pay 140K for.

Remember, this is for fun. They are less fun.

Want to go fast? Buy an actual race car or an open wheeler and absolutely massacre any road car and laugh at them/us for even bringing a stupid boat out on the track. f**k, actual Go-Karts will turn better times if you want to do some insane superkart stuff before you die doing said superkart stuff.

I feel attacked... lol 

  • Like 1
12 hours ago, Kinkstaah said:

Remember, this is for fun. They are less fun.

Then why do we mod our 90s shit boxes to try match the performance of these Euros? twin scroll turbos, traction control, motorsport grade ABS, retrofitting DCT/ZF boxes, variable cam timing, etc.?

  • Haha 1
17 hours ago, Dose Pipe Sutututu said:

Nissan Autism over takes any common sense.

 

48 minutes ago, Dose Pipe Sutututu said:

Then why do we mod our 90s shit boxes to try match the performance of these Euros? twin scroll turbos, traction control, motorsport grade ABS, retrofitting DCT/ZF boxes, variable cam timing, etc.?

You answered your question earlier 😂

  • Haha 3
52 minutes ago, Dose Pipe Sutututu said:

Then why do we mod our 90s shit boxes to try match the performance of these Euros? twin scroll turbos, traction control, motorsport grade ABS, retrofitting DCT/ZF boxes, variable cam timing, etc.?

You don't. Or if you do, you do it for fun?

It's only a shit box to you because you're accustomed to it. You just want a new shiny thing instead of enjoying the thing you built. Really you have to ask yourself what you find fun about the journey and target it. Objectively your car is great and you seem to need more seat time.

Go read a review of the same people who drive a R chassis who have also driven a modern BMW. You can see as clear as day which one they find more entertaining/rewarding to actually sit in the seat of and want to go driving in.

I still remember Carlos Lago saying his LS swapped S13 was a better car to drive than a P1/LaFerrari or 918.

https://youtu.be/w-BEXoI9J-M?t=361

There you go.

  • Like 1

I think there's the enjoyment/challenge with building something yourself and seeing how it performs vs X Product/workshop.

Like you I am way over invested in the race car and I am always thinking I should sell and buy something I can drive there, easier to maintain and better from the start but cbf dealing with people to sell it. 

The biggest thing is it should be fun going out and driving the car. Once that enjoyment is gone maybe look at just parking it up for a while under a cover. 

  • Like 1

"I should sell and buy something I can drive there, easier to maintain and better from the start"

This. For me it's the ease, because easy = less time and money needed to enjoy.

There's a reason I am spending bulk time riding MTB in the last 12mths, cheap, easy, fun, friends, speed/skill needed, adrenalin/risk etc. 

It's accessible. 

I should not have bought that XR5 which is taking time away from S13, but I really wanted to try my hand at engine building, so here we are lol


Wow, what a random AF thread... 

  • Like 1
  • Haha 2

"Johnny's should have bought a BMW and random chat thread"

One of the biggest things to with the 90s shitboxes is the nostalgia. Look at all the senior gentlemen in their chrome bumper stuff. We are now becoming those guys. Where everything was better " back in my day"

 

  • Like 1
  • Haha 2
2 hours ago, Jasoncauser said:

My way of thinking is I just love driving fast (in a controlled environment of course lol)
I love that my 32 has no driver aids and that I have to drive it.
I may only be doing 1.13's at Wakefield but Im on a buzz for a good few days after. 
New setup would be nice to compare if Wakefield reopens

Did the gokart thing (125cc Rotax 2 stroke) for a few years, but my 50 year old body cant handle the violence of extended karting sessions lol 

Modern cars, you are like a passenger, it does the driving while you sit back and enjoy the ride, sort of haha

This right here is why after 3 months he’d hate the bmw, yeah it’ll rip fast lap times but would be so boring while doing so that he’d miss the skyline and actually having to drive it 

  • Like 1
8 minutes ago, ActionDan said:

Wrong, he'd be loving the ease of use, daily driving it, refinement. 

Do you guys even know Johnny? 

And no need to carry 5x jerry cans each time I go to the track, BMW probably will come/leave with the same tank of fuel!

Old Wakefield Park days... there was another jerry can in the boot along with tools

image.thumb.png.8c2c6d77af4fccac7a7e713942fd18b6.png

  • Like 1
  • Haha 1

hope your not a smoker lol

I have always trailered my car to the track, seen too many times a brakedown or crash and having to pay a crap load for tow home. 
I dont know how you guys do it lol

and with a modern car, more likely to be driven to track, flogged, then driven home, you are all nuts haha
 

  • Like 1

Trailer for sure, but easy to say when you live somewhere that has the space to store trailers, daily and race cars, etc. 

City life is not as simple with race cars, storing a car/your daily or tow rig AND a trailer safely is just plain harder. 

  • Like 6
7 minutes ago, ActionDan said:

City life is not as simple with race cars, storing a car/your daily or tow rig AND a trailer safely is just plain harder.

correct, if I could I would!

  • Like 1

Just hire a trailer for the few times you go to the track...

 

Also, those new cars, all great and fast, until one sensor goes on the fritz.

 

Was just helping the guys near us prep for the 6 hour at Bathurst. Had issues with TCS wanting to be on permanently (and kicked in).

New yaw sensor as it had crapped out, that fixed the fault codes, but issue still present.

Final fix, bleed the brakes... It decided it was upset with brake pressure when TCS was trying to "control the car"... And that was in a car already 14 years old but full of euro electronics...

 

All those modules are great, until they start doing stupid things...

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
×
×
  • Create New...