Jump to content
SAU Community

Recommended Posts

Burning $1000 - Brakes or Diff?

As title states, I have roughly $1000 to spend on my r33 gtst.

It's currently my daily which I've tracked a few times. Has 300kw and dialed in suspension; brakes and diff are pretty much the only things still stock.

Option A - Nismo GT Pro 1.5 Way LSD.

Good for track and will stop the singling, but possibly shit for a daily driven car.

Option B - S15 Torsen Diff and half shafts.

Good street diff but requires use of weaker 6 bolt half shafts. 

Option C - 350z Brake upgrade.

350z front calipers/rotors and upgraded rear rotors and pads. But enough of an improvement over stock?

Any of the above options should cost around the 1k mark (s15 diff may cost less), give or take.

Which of the above would be the most worthwhile/best bang for buck?

Open to opinions/suggestions.

 

Edited by colourclassic
  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/469602-burning-1000-brakes-or-diff/
Share on other sites

I'd cast a strong vote for Option C, especially at 300kw. You'd want good pads and fluid too so 1k might be a stretch, but those are easy to add in later. Good DIY by Johnny here: http://www.trak-life.com/diy-350z-brembo-brakes-conversion-nissan-skyline-r33-gts-t-gts-gts-4/

Re Option A, I had a Nismo 1.5-way put in last year, it's lovely on the track but I wouldn't daily it. It's 'livable' but not fun in suburban traffic. Plus, the Pro is about 1.5k new from Japan + installation so you're looking at more like 2k+ if new and you're not installing it yourself.

  • Like 1

It's got new brake fluid and QFM HPX pads at the moment. The brakes work okay I suppose but I'd like a bit more initial bite and less fade. 

The diff definitely needs to be done, but I'm weary of using a mechanical lsd on a street car. Wish there was a drop in torsen for R33's. 

As far as brakes go, unless your doing a lot of track work, the standard setup with good fluid, pads and air guides for cooling work well. They work well on track too but the pads won't last more than 2-3 track days. If you decide on staying stock, try intima Sr next time around. They will provide better bite and fade resistance than your current pads

 

 

Edit. If you get serious about brakes, you may want to go bigger than 350z brembo, something like hardsteppa got (ATTKD brake Kit) from just jap. Although significantly more than 1k.

 

 

  • Like 2
5 hours ago, hardsteppa said:

With a torsen, don't they only lock while both wheels are on the ground? So any inside wheel lift will mean no lsd? Fk that for a street car.

Yes, but with both wheels on the ground they offer good positive differential action without any of the clunkiness of a mechanical diff. On the street the only time the wheels would come off the ground is entering steep driveways, which the car is too low for anyway. 

2 hours ago, colourclassic said:

Yes, but with both wheels on the ground they offer good positive differential action without any of the clunkiness of a mechanical diff. On the street the only time the wheels would come off the ground is entering steep driveways, which the car is too low for anyway. 

if you're using adjustable coilovers, they tend to have a lot less droop than stock suspension, so the inside wheel can lift quite frequently with any sort of hard cornering, or uneven surface. That's why I love my mechanical, locked on throttle even with one wheel right off the ground.

Sure they are clunky, but after being able to stay right on the tail of a new model Porsche 911 on the mountain circuit, I wouldn't change it out, they really are amazing. My biggest gripe is more the wear to tyres. 

tbh I don't drive so hard to lift wheels on the street.

my mates s15 had the helical/torsen diff and for all its disadvantages, it was superior to a viscous LSD in all circumstances. another mate has a 34 with a kaaz 2 way and it was hell to drive on the street, only good for track. i guess a lightly preloaded 1.5 way would be a compromise between the two.

Edited by colourclassic
On ‎14‎/‎03‎/‎2017 at 11:59 AM, admS15 said:

As far as brakes go, unless your doing a lot of track work, the standard setup with good fluid, pads and air guides for cooling work well. They work well on track too but the pads won't last more than 2-3 track days. If you decide on staying stock, try intima Sr next time around. They will provide better bite and fade resistance than your current pads

 

 

Edit. If you get serious about brakes, you may want to go bigger than 350z brembo, something like hardsteppa got (ATTKD brake Kit) from just jap. Although significantly more than 1k.

 

 

I did all the usual brake improvements to the standard R33 GTS25t set-up. Slotted RDA rotors, QFM A1RMs, braided lines, Cusco master cylinder stopper, RBF660, cooling ducts etc.  I then decided to pay the $ for a K-Sport BBK (356mm F&R  / 8 and 4 piston) The difference is night and day.  Bit more than $1k though.

Do the diff first. Save for a BBK.

I have a Nismo GT Pro 1.5 in mine. It's liveable. Might change my mind if it was my daily  - it's not.     

 

  • Like 1
On 14/03/2017 at 9:41 PM, colourclassic said:

tbh I don't drive so hard to lift wheels on the street.

my mates s15 had the helical/torsen diff and for all its disadvantages, it was superior to a viscous LSD in all circumstances. another mate has a 34 with a kaaz 2 way and it was hell to drive on the street, only good for track. i guess a lightly preloaded 1.5 way would be a compromise between the two.

Please go and drive (or at least be a passenger) a 1.5-way before deciding, especially if it's a daily driven car. Do slow speed and sharp corners too, the usual suburban stuff.

People have very different views on what's 'streetable' and 'livable', I certainly wouldn't drive my car with the 1.5-way as a daily. Yes, soft, I know.

  • Like 1

Clunks and bangs etc. At car park manoeuvring speeds are par for the course with a GT Pro 1.5-way. Might be a bit tamer on the softest of the three settings and with certain diff' fluids   

Do the larger 6 and 8 piston BBK's work okay with the factory master cylinder and ABS? I guess with much larger front brakes the bias might be a bit more forward based?

Sounds like a mechanical diff isn't what I want for now. I might go about either shimming my VLSD or getting an S15 diff and giving that a shot. 

Should be able to squeak in under $1k for a 370z akebono brake upgrade.
Don't fade like the 350z brembos do.

I managed a set of calipers with pads, f&r RDA slotted rotors and bbk bracket for just under $1k, so it can be done.

Sent from my HTC_0P6B using SAU Community mobile app

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Block bump. $400. As above cyl 6 needs bore or sleeve.
    • I would think making the argument that the travel is limited by a spring flexing against a spring perch as "the same method". Later on in the document they do state that the spring can't bind on full bump travel and cannot come loose in full rebound travel as well. (which is all very sensible). The laws are actually pretty sensible and reasonable. It's just that the people who enforce and check them don't actually read them or know them accurately. "Oh, coilovers? Instant fail mate. Don't even need to look at it." - Guy who will be instantly reported by me. There is probably merit to people who do get defected for height also get defected for the suspension in that state that allows it. I did never consider the people who are complaining about coilovers being picked on are also running around at 50mm off the floor.
    • I think given SAU's knowledge of E85 we can strongly conclude that 10% ethanol in almost any situation is entirely fine. Almost all of the myths against E85 were overblown, let alone E10.
    • From your link See bold text, is this referring to damper settings, if so that may a issue for "some" inspectors, I cannot see aftermarket coilovers having the evidence that "must be available that its functional performance is equivalent to the original" Maybe just remove the adjustment knows and hope for the best???? Meh 5.2 Suspension travel In all instances, modifications to a vehicle’s suspension must ensure the integrity of the system and not compromise the ride quality. At least two thirds of the original suspension travel should be maintained in both directions (rebound (i.e. extension) and bump (i.e. compression)), and rebound must be limited by the same method used by the vehicle manufacturer or if this is not practicable due to the nature of the modification, an equivalent method. If an alternative method is used, evidence must be available that its functional performance is equivalent to the original.
    • They actually don't - They adhere to VSB14 rules just like Victoria. The rules are against CABIN adjustable height, and it quite clearly states that the height has to be within parameters. I asked the VASS engineer to confirm this when I got my car engineered and they refused to engineer the coilovers because they didn't meet the requirements for requiring engineering. (mine are height adjustable.) People "Not wanting to bother" with "Actually reading/knowing/adhering to the rules" should result in fines and immediately losing the ability to issue blue slips and/or RWC's in Vic.
×
×
  • Create New...